https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/358542.aspxSun, 12 Feb 2012 05:05:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:358542kimhav0https://archivedforum.beoworld.org:443/forums/thread/358542.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=358542<p>I will soon wrap up my <a href="http://forum.beoworld.org/forums/t/40767.aspx"><b>re-wiring project</b></a> in my house and where CAT7 cable has been used for the MasterLink network. In my case I wanted to make use of ML-sockets on several spots in the house which then directly connects to the units; but from this <a href="http://forum.beoworld.org/forums/p/28856/298959.aspx#298959"><b>thread</b></a> it&#39;s mentioned that the since the CAT7 cabling is missing &quot;+ Supply Voltage&quot; I then need to solder together ML-Sense (pin 03) and +Supply (pin 12) to get it to work proper. Simply I don&#39;t like to have end the CAT7 with a RJ45 socket and the contininue with the B&amp;O RJ45 to ML socket cable.</p> <p>&nbsp;</p> <p>Open for suggestions and images how to do above in best practice way.</p><div style="clear:both;"></div>