General Forum

Re: A.Aux in link room

Opman — Tue, 07 Feb 2012 17:44:19 GMT

For the record, Link + Phono command to the Link Passive = N.Radio on the BeoSound3000

Opman

Re: A.Aux in link room

Opman — Tue, 07 Feb 2012 17:42:01 GMT

Success :-)

Link + A.Tape on the BeoLink1000 does the trick.

The BeoSound3000 display shows the source changes from A.Aux to A.Tape but I still get the Airport Express in the kitchen.

Result.

Thanks for the suggestions

Opman

Re: A.Aux in link room

Hiort — Tue, 07 Feb 2012 17:24:54 GMT

Have similar setup and have the same problem with A Aux. Suggested Commands does not work.

Re: A.Aux in link room

Emil — Tue, 07 Feb 2012 17:20:39 GMT

Link + a.mem / a.tape should do the trick on a beo4.

Re: A.Aux in link room

Vienna — Tue, 07 Feb 2012 16:56:39 GMT

Opman:

BeoSound3000 is in option 1 and Passive kit is option 4 as its open plan and
commands used to "sneak" to the kitchen hence the need for the "link" command.

Depending which SW version your BSd 3000 and Passive have,
using the BL1000 and pressing "LINK" "PHONO" might work.

Re: A.Aux in link room

BnoBlueBoy — Tue, 07 Feb 2012 16:54:26 GMT

does the passive have old software?

have u tried a mem instead of v aux?

A.Aux in link room

Opman — Tue, 07 Feb 2012 16:48:34 GMT

Hello All

I have a BeoSound3000 in lounge with Lab4000's. I also have a pair of CX50's in kitchen on a Link Passive.

BeoSound3000 is in option 1 and Passive kit is option 4 as its open plan and commands used to "sneak" to the kitchen hence the need for the "link" command.

I have just installed an Airport Express to the A.Aux socket of the BeoSound3000 and it all works fine. I can only access this source in the kitchen by manually pressing the Passive sensor after first switching on A.Aux in the lounge.

Is there a way of opening the link to the kitchen via remote? I normally use BeoLink1000 in the kitchen but also have a Beo4 in the lounge.

Thanks

Opman