https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/356352.aspxMon, 30 Jan 2012 09:35:27 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:356352Søren Mexico0https://archivedforum.beoworld.org:443/forums/thread/356352.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=356352<p>Welcome to the forum, contact Dillen on the forum, he normaly has the correct belt for Beograms, he gets them specially made and they fit.</p> <p><a href="http://forum.beoworld.org/members/Dillen/default.aspx">Here</a> and chose start a conservation with Dillen</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/356332.aspxMon, 30 Jan 2012 06:39:54 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:356332sheitert0https://archivedforum.beoworld.org:443/forums/thread/356332.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=356332<p>Does anyone know correct belt length for the subject Beogram 3000? The original that I have is still working fine(turntable was not used for over 30 years), but I would like to purchase a replacement. &nbsp;So far I have purchased two belts, &nbsp;one from turntablebasics.com and one from elexatelier.com and both appear to be about 1 inch too short when compared to the original. &nbsp;Also, both of the new belts cause what seems to be audible bearing noise. &nbsp;Any assistance would be appreciated.</p> <p>Thanks</p> <p>Steve</p> <p>&nbsp;</p> <p>&nbsp;</p><div style="clear:both;"></div>