https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/352670.aspxTue, 03 Jan 2012 15:41:13 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:352670scott4510https://archivedforum.beoworld.org:443/forums/thread/352670.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=352670<p>hello again,</p> <p>i am replying to my self. the initial post garnered no responses, so i wrote directly to keith in desparation. he was kind enough to answer and i am posting again to share his wisdom.</p> <p>if i have understood things, it can be stated simply as r-g-b &gt; s-video &gt; composite. however...</p> <p>* r-g-b is not the same as y-pb-pr. this may seem obvious, but many products use red, green, and blue rca connectors for a y-pb-pr signal. personally, i i am looking for a hdcp-compliant downscaler and found a y-pb-pr, but not a r-g-b.</p> <p>* s-video is not officially supported by the scart standard. make sure your receiving device can handle the signal. the bv7-40 can. keith provided me with the pin diagram. i can pass it along if useful</p> <p>i plan to use a downscaler with s-video + audio output to connect to the bv-7 scart with an appropriate cable. keith indicated that it would be better to use a converter from s-video to r-g-b, but for me this was one box too many.</p> <p>i hope this helps any one else with similar questions. and thanks again to keith !</p> <p>&nbsp;</p> <p>- scott</p> <p>&nbsp;</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/350041.aspxSun, 11 Dec 2011 18:16:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:350041scott4510https://archivedforum.beoworld.org:443/forums/thread/350041.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=350041<p>hello,</p> <p>excuse me if this is a really stupid question ...</p> <p>i plan to distribute video from a bv7-40 to a bc6-26 via rfla. the input connecter type on the bv7-40 is scart. the output from the hdmi downscaler can be component, s-video, or composite.</p> <p>is it worth fooling around with higher-quality composite, or is this loss somewhere between the scart conversion or distribution via rfla ?</p> <p>thanks for your help,</p> <p>&nbsp;</p> <p>- scott</p><div style="clear:both;"></div>