General Forum

Re: penta connection problems

Nickyg63 — Thu, 01 Dec 2011 13:23:46 GMT

Lucky man, they are mk3's possibly the most saught after!!

Re: penta connection problems

para999 — Thu, 01 Dec 2011 05:31:49 GMT

the displays are green

Re: penta connection problems

Nickyg63 — Thu, 01 Dec 2011 01:37:28 GMT

they are great speakers enjoy!

Out of interest what colour are the displays? orange/yellow or green?

Re: penta connection problems

Evan — Wed, 30 Nov 2011 22:15:21 GMT

Fantastic! Always happy to help.

Re: penta connection problems

para999 — Wed, 30 Nov 2011 18:03:51 GMT

all working now thankyou for your help

Re: penta connection problems

para999 — Wed, 30 Nov 2011 13:13:27 GMT

Evan:

Hi, welcome to BeoWorld!

Do you have Powerlink cables? You will need two.

You have two options here:

1) Wire each speaker directly to the BeoCenter.

2) Daisy-chain the two Pentas together and connect the Center to one of them.

Do not worry about which port corresponding to another port, they are all equal. Just plug and play!

You are correct, each speaker must be set to the appropriate channel, right or left. Once you have determined which speaker is which, simply set the L/R switch to the corresponding position of the speaker. Naturally, one will be left and the other right. The reason for this is due to the fact that each Powerlink cable carries both channels, so when you select L or R, you are effectively choosing which signal you want to hear.

Hopefully this is clear enough to get you moving. If not, get back to us!

thanks for your reply i will give it a shot and yes i do have powerlink cables

Re: penta connection problems

Evan — Wed, 30 Nov 2011 13:08:06 GMT

Hi, welcome to BeoWorld!

Do you have Powerlink cables? You will need two.

You have two options here:

1) Wire each speaker directly to the BeoCenter.

2) Daisy-chain the two Pentas together and connect the Center to one of them.

Do not worry about which port corresponding to another port, they are all equal. Just plug and play!

You are correct, each speaker must be set to the appropriate channel, right or left. Once you have determined which speaker is which, simply set the L/R switch to the corresponding position of the speaker. Naturally, one will be left and the other right. The reason for this is due to the fact that each Powerlink cable carries both channels, so when you select L or R, you are effectively choosing which signal you want to hear.

Hopefully this is clear enough to get you moving. If not, get back to us!

penta connection problems

para999 — Wed, 30 Nov 2011 11:03:30 GMT

newbie be gentle plz

have just aquired a beocenter 8500 with penta active speakers. did'nt get any instructions on how to connect the speakers i.e which lead goes where.on the base of the speakers it has powerlink 1 and powerlink 2 dins on both speakers on the beocenter it has 1x powerlink1and 1x powerlink2 dins can you tell me which goes to where. i have no other systems or speakers attached. i was told one speaker has to be set to right and one speaker to left...... but totally confused here.

also is it possible to tell me in laymans terms what the slide switches are for under the dropdown panels on the speaker bases.

sorry about all the questions.