General Forum

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

riegado — Wed, 07 Dec 2011 12:59:55 GMT

Thank you for all the answers :-)

with the remote control Beo4 it is definitely not possible to get this done!

I got an other solution, connect the external device to the BeoVison and use the v.Mem. Then I can redirect the sound to all speakers.

regards

riegado

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

Carolpa — Thu, 01 Dec 2011 06:17:50 GMT

your right; didn't think about the SD

the machines with only a CD like the BS3000 and the BS9000 the commands ATAPE and PHONO open the AUX input

so he should try the AV PHONO instead

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

Opman — Thu, 01 Dec 2011 05:53:48 GMT

Carolpa:

AV A.MEM will do the trick

Won't that select the SD card on the BeoSound4 rather than the A.AUX socket?

Opman

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

Carolpa — Tue, 29 Nov 2011 12:28:51 GMT

AV A.MEM will do the trick

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

Opman — Tue, 29 Nov 2011 11:41:53 GMT

As both the "AV" and "A.AUX" commands are accessed via the list button on the Beo4 remote control, I don't think it is posible to acheive what you are trying to do. However a Beo5 or Beo6 could have a button created that could send the command "AV - A.AUX". That would do the trick.

Opman

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

riegado — Tue, 29 Nov 2011 10:42:45 GMT

Hi petermc

my beo4
has

TV Light Radio
DTV DVD CD
V.Mem Record A.MEM

Thx

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

petermc — Mon, 28 Nov 2011 04:48:14 GMT

Depending on the version of your Beo4 - does it have a A-Tape button (under the Cd button)?

If so, try List AV then A-Tape.

I'll see if I can find another key combination.

Re: How to use Beo4 Remotecontrol to redirect A.Aux to AV

Hiort — Mon, 28 Nov 2011 02:34:33 GMT

I´m quite sure it is not possible. Of some reason B&O have not been thinking of that scenario.

How to use Beo4 Remotecontrol to redirect A.Aux to AV

riegado — Sun, 27 Nov 2011 12:29:19 GMT

Hello

I am new hire and have less experience with B&O looking for help!!

Have a BeoSound 4 with speakers and BeoVísion connected with a MasterLink cable and a Beo4 remote control.

I am able to send the radio sound to the TV by using the Beo4 Key <List> until AV is in the display followed by the key <Radio>. Then the TV switched on (without screen) and Speakers playing radio music. So far so good.

A friend of me is DJ and we connected his equipment to BeoSound4 to AUX-in, with Beo4 switch to with key <List> A.AUX , then the standard speaker worked fin. I do not find any key combination to redirect the A.AUX sound to the TV as I can do it with the radio.
Dose anybody know the Beo4 key combination?

Thank you