https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/347330.aspxWed, 23 Nov 2011 14:38:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:347330henrik0https://archivedforum.beoworld.org:443/forums/thread/347330.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=347330Aha! I see that the issues/problems I have (but haven&#39;t mentioned here at beoworld) is due to known bugs! Thanks for the information, I&#39;ll try to find newer MCL2AVs for my system! :-)<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/347296.aspxWed, 23 Nov 2011 10:45:57 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:347296beowild0https://archivedforum.beoworld.org:443/forums/thread/347296.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=347296<p>Dear Keith</p> <p>Thanks a lot for this information.</p> <p>Best Regards, David</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/346976.aspxMon, 21 Nov 2011 11:05:15 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:346976Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/346976.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=346976<p>David,</p> <p>The following issues were fixed by version 2.2:-</p> <ul> <li>If a two-way CTV&nbsp;for example a&nbsp;39XX and a one-way audio master&nbsp;like the&nbsp;Beomaster 5500 are placed in the central room, the MCL2AV is unable to detect the connection to a one-way audiomaster. This results in the following issues:-</li> </ul> <p style="padding-left:60px;">Wrong volume level and wrong display read-out in x-tra active speaker room.</p> <p style="padding-left:60px;">If an audio source is activated from an x-tra TV room, the volume will rise to 34. If BM 5500 has already been switched on, the volume should be raised to 10. If BM 5500 is in standby mode the volume should rise to 20. </p> <ul> <li>If BL 7000 is used for LOUDNESS operation in the active speaker room, incorrect status is displayed. When LOUDNESS is active, the BL 7000 display reads out &quot;LOUDNESS OFF&quot;. When LOUDNESS is inactive, the BL 7000 display reads out &quot;LOUDNESS ON&quot;. </li> </ul> <p>Subsequently, the following issues was fixed with version 2.3:-</p> <ul> <li>Video sources in main room go into standby when TV in X-TRA TV room is operated.</li> <li>The&nbsp;system may&nbsp;become &quot;locked&quot; when LINK + A.TAPE is operated in option 4 (Link and audio master in the same room).</li> <li>Two-way operation of central video source in option 1 may cause &#39;No contact&#39;</li> <li>Programming of central video source in option 1 is impossible.</li> <li>Set-clock from local TV-room. MCL2AV does not send the &#39;set-clock&#39; information on to the other products in the system and the other clocks are therefore not set. The problem occurs with &#39;set-clock&#39; on Beolink 5000 and Beolink 7000 but also when storing the text clock on the screen.</li> </ul><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/346927.aspxMon, 21 Nov 2011 05:06:53 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:346927beowild0https://archivedforum.beoworld.org:443/forums/thread/346927.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=346927<p>Hi</p> <p>Does anybody know the difference between Software Version 2.1 and 2.3 of the MCL2AV Type 2031 (XTRA TV Kit)? </p> <p>David</p><div style="clear:both;"></div>