General Forum

Re: Beovision 7-40

elephant — Mon, 14 Nov 2011 02:41:38 GMT

stefan:

you must add the CLOCK button. Press STDBY and LIST at the same time. Now find ADD? by searching with UP or DOWN button.

Press GO. Now search CLOCK. When CLOCK is displayed on Beo4, press GO. Now CLOCK button is in your Beo4 LIST.

STDBY is the "stand by" button which is the orange dot on the Beo4.

People think it is an OFF button :-) but B&O equipment is always in stand by, waiting to spring to attention when you command it !

I hope this clarifies Stefan's instructions

Re: Beovision 7-40

Angel22 — Thu, 10 Nov 2011 11:58:16 GMT

Yes I think you are right, in that you have to 'add' the clock button. It is not a standard button.

Do you have a Beovision 7?

Re: Beovision 7-40

stefan — Thu, 10 Nov 2011 11:51:39 GMT

Maybe you must add the CLOCK button. Press STDBY and LIST at the same time. Now find ADD? by searching with UP or DOWN button.

Press GO. Now search CLOCK. When CLOCK is displayed on Beo4, press GO. Now CLOCK button is in your Beo4 LIST.

Stefan

Re: Beovision 7-40

Angel22 — Thu, 10 Nov 2011 11:44:34 GMT

Thanks very much for explaining that.

I have a Beo 4 remote. I don't seem to be able to see a button related to clock on the remote.

Re: Beovision 7-40

stefan — Thu, 10 Nov 2011 11:22:34 GMT

Sorry.

Time (clock) will not be displayed on the screen, picture like it`s on BV5,6,9. BV7-40 has a display on the right upper side. Usually it displays the source or volume level. But if you press CLOCK on your Beo4,5,6 it will switch to the current time.

Stefan

Re: Beovision 7-40

Angel22 — Thu, 10 Nov 2011 11:10:05 GMT

Not quite sure what you mean.

Re: Beovision 7-40

stefan — Thu, 10 Nov 2011 10:18:15 GMT

No. Only on display.

Stefan

Beovision 7-40

Angel22 — Thu, 10 Nov 2011 08:29:31 GMT

Is it possible to display the time on the screen?