General Forum

Re: Sound Setting on BL2000 possible?

Heribert — Mon, 25 Jul 2011 00:03:45 GMT

Chrisreunion:
The only thing you can do is changing each driver's volume settings in the service menu,

Hi Chris,

How can I access the service menue and then how to change the setting?

Thanks,

Heribert

Re: Sound Setting on BL2000 possible?

Vienna — Sat, 23 Jul 2011 16:37:05 GMT

Chrisreunion:

Of course, placing the BeoLab 2000 in a corner will also greatly increase the audible bass level

Absolutely true - compared to a "freestanding" position:

- mounting a speaker "flat" on a wall will increase bass output by approx. 3 dB

- mounting in a corner of 2 walls OR a wall and the floor/ceiling will increase bass output by approx. 6 dB

- you'll gain 9dB if placing a speaker close to floor/ceiling AND 2 walls.

... small speakers like CX 50/100 or BLb 2000 will sound completely different!

Re: Sound Setting on BL2000 possible?

Chrisreunion — Sat, 23 Jul 2011 15:08:39 GMT

The only thing you can do is changing each driver's volume settings in the service menu, meaning you increase the woofer's volume to +2 dB and /or decrease the tweeter's volume by - 2 dB, this will of course change the factory settings but will give you more audible bass , but not lower frequencies.

Of course, placing the BeoLab 2000 in a corner will also greatly increase the audible bass level

Re: Sound Setting on BL2000 possible?

stotty1111 — Sat, 23 Jul 2011 13:53:58 GMT

Was there not a thread a couple of years ago re pcb changes to achieve this?

Re: Sound Setting on BL2000 possible?

SWISS_2 — Sat, 23 Jul 2011 13:48:15 GMT

Heribert;

We also tried adjusting the sound inside the Beosound 4 without much effect on the Beolab 2000.

Re: Sound Setting on BL2000 possible?

SWISS_2 — Sat, 23 Jul 2011 13:48:13 GMT

Heribert;

I too thought of this last year when we upgraded from a Beosound 3200 to a Beosound 4.

We wanted a bit more bass with the sharper digital notes from the Beosound 4.

It is pre-set, just like the Beosound 1. No luck, but it remains a very clever, good speaker.

Re: Sound Setting on BL2000 possible?

uluseln — Sat, 23 Jul 2011 06:49:22 GMT

hello

Unfortunately, the bass and treble adjustment of the factory can not be produced in this way, but a speaker with very good sound regards

Sound Setting on BL2000 possible?

Heribert — Sat, 23 Jul 2011 04:40:30 GMT

Dear all,

I have a Beolab 2000 and like it a lot. But I would like to have more Bass on it. It sounds a little thin in comparison to my other speakers (BL3 and BL6000). Especially noticable when all speakers are on and I walk through the house.

Any ideas how I could change the Bass/Treble setting?

Thanks, Heribert