General Forum

Re: Beocenter 9500 multiple rooms

Mico — Mon, 23 Jul 2007 10:01:33 GMT

Thanks Peter,

very comprehensive document indeed! The fact that speakerlink seems to be driven with the power from the amp was interesting. I have seen several MCL2 douments but this was definately the best.

Re: Beocenter 9500 multiple rooms

Peter — Sun, 22 Jul 2007 16:14:50 GMT

Speakerlink carries data as well as signal but not as much as Powerlink. Look at the system manual 89-90 for a diagram on page 7-3. You can find the manual, which is superb, here.

Re: Beocenter 9500 multiple rooms

Mico — Sun, 22 Jul 2007 14:55:17 GMT

Peter:

Please consider upgrading as you will find a wealth of information in the manuals on site and you will help Lee to keep this site running. Join as a Gold member and you may even win something!

Could not agree more...

This thread reminded me of an interesting question of technology that I have been wondering: is the output level information of a speakerlink connection a data or a power type of one (with modern terms)?

Re: Beocenter 9500 multiple rooms

Peter — Sat, 21 Jul 2007 12:40:20 GMT

I am sorry to say this as I do try to be as helpful as possible, but you have now posted over 175 times, almost always asking questions that would be answered completely if you joined as a silver member and downloaded the manuals. The MCL Handbook would be very useful in setting up the systems that you have mentioned as would the Product Configuration Guide.

In answer to the questions above:

1. No, the volume in a passive link room will relate to the volume in the master room though the master room need not be on.

2. What you need is a MCL2A which provides the IR eye for the second room.

Please consider upgrading as you will find a wealth of information in the manuals on site and you will help Lee to keep this site running. Join as a Gold member and you may even win something!

Beocenter 9500 multiple rooms

Frank Rizzo — Sat, 21 Jul 2007 12:32:18 GMT

Question for all the 9500 people.....

I'm wanting to run Pentas off the Powerlink in the room with the 9500.......then

I'd like to take the speaker level outs to some speakers in another room....

This leaves me with 2 questions...

1) Can the speaker level (internal amp) of the 9500 be controlled separately from the Powerlink (low level outs)?? How??

2) Does the 9500 have an IR imput in...that I could connect another IR imput???...say and put this second IR imput in the second room??

Thanks all...