Re: Screen goes yellow/red after 30-60 minutes

villarsch — Tue, 28 Jun 2011 03:29:57 GMT

I have found why the screen changes, and as the reason may affect other Boeworld members, I am detailing the reason.

My 7-40 Mk II has the usual DVi-D adaptor, as will any tv which only has a DVI input. This adaptor, a DVI-D single link, is ok for a Sky HD box. The new 1Tb box, however, has a greater band width due to its capability of transmitting 3D images. So this later box requires a DVI-D dual link adaptor. Fitting this (it's about£1) has solved the problem.

Screen goes yellow/red after 30-60 minutes

villarsch — Thu, 23 Jun 2011 12:44:56 GMT

I have just set-up a Sky Amstrad 1Tb box to my BV 7-40 Mk II. I have connected it via AV3 using DV-1 and SCART. Unfortunately this box is not in the B&O list, so I have used the Thompson Sky HD. The automatic standby is set at "At TV Standby". This setup, however, is resulting in the screen every 30-60 minutes changing to a horrible yellow or red colour. Needless to say, this is not going down too well with my wife who is watching Wimbledon, so any solution would be greatly appreciated.

Villarsch

General Forum

Re: Screen goes yellow/red after 30-60 minutes

Screen goes yellow/red after 30-60 minutes