General Forum

Re: Beovision LX 2802 N - Remote Control not working

Friedmett — Sat, 04 Aug 2007 18:27:21 GMT

You can also try something else. I got a Video Terminal before my Beolink 1000 for use with my L2800.

The seller demonstrated the Beovision with a Beolink 1000 but gave me the V -Terminal to use.

It needed batteries but it did not work either. I took it apart and tried to touch the printboard. That worked. Put it back together and it worked with no problem. Got a new rubberpad as it had several numbers ripped from use.

Be carefull when open the remote as there is 2 wires going to the batteries. If they get loose you need to solder them back on.

Re: Beovision LX 2802 N - Remote Control not working

Friedmett — Sat, 04 Aug 2007 07:50:25 GMT

This reminds me of getting my LX5500.

I could not get the Beolink 1000 to work at all. I checked the batteries which were all fully loaded. The B&O dealer is only a 5-10 minutes walk so I went and got it fixed. He installed a new print board and it has been working ever since.

Re: Beovision LX 2802 N - Remote Control not working

jscanjscan — Sat, 04 Aug 2007 04:22:11 GMT

Thanks. I think the Beolink is definitely dead - nothing works. I bought a copy remote, which works the basic functions (like on/off, volume, etc), but I can't seem to change things like brightness/contrast, or get teletext, or any kind of set-up menu. Can you help? Julie.

Re: Beovision LX 2802 N - Remote Control not working

Jandyt — Thu, 19 Jul 2007 10:11:29 GMT

Welcome to the forum Julie!

Andy T.

Re: Beovision LX 2802 N - Remote Control not working

jscanjscan — Thu, 19 Jul 2007 09:58:52 GMT

Thanks, Peter. Will try it tomorrow, and let you know. Best wishes, Julie.

Re: Beovision LX 2802 N - Remote Control not working

Peter — Thu, 19 Jul 2007 08:14:48 GMT

Sounds like an IR problem but before calling the service department, with the set in stand by, press:

PICTURE 1 STORE

on the Beolink 1000 and then see if it works.

Re: Beovision LX 2802 N - Remote Control not working

jscanjscan — Thu, 19 Jul 2007 07:01:25 GMT

Yes, I can. I can switch it on with those little buttons at the bottom of the screen.

Re: Beovision LX 2802 N - Remote Control not working

The Stig - ver. 1.7 — Thu, 19 Jul 2007 06:50:16 GMT

Can you turn it on manually on the telly?

Beovision LX 2802 N - Remote Control not working

jscanjscan — Thu, 19 Jul 2007 06:38:40 GMT

Hi. On the Beovision 2802, the Beolink 1000 remote does not work. So I bought a copy remote that was guaranteed to work with the TV without any setting up - but that does not work either! Do you think the TV has a problem with its IR signal?