General Forum

Re: Beogram 4500 compatible with a Beomaster 3500?

Dave0280 — Wed, 25 May 2011 01:49:24 GMT

Thats interesting as on closer inspection the 4500 panel is pretty good (8/10) so i wouldn't mind having a go at trying to get the others back to the polished finish.... Nitromors is a pain to source where i am - would cellulose stripper do the job?

A user called A2bur put a thread on this on the old forum - anyone point me in the right direction as i'm going to have a go.....

Thanks guys

Re: Beogram 4500 compatible with a Beomaster 3500?

Evan — Thu, 19 May 2011 17:13:36 GMT

Great alternative Chris.

There is a picture of a 3500 Master that was converted this way in the Flash your B&O thread.

Re: Beogram 4500 compatible with a Beomaster 3500?

Medogsfat — Thu, 19 May 2011 14:15:48 GMT

Dave0280:

The tops are pretty tired on all so i'm thinking a restoration project and possibly a chrome finish

I'm pretty certain that the 3500 panels are polished underneath the grey paint. I seem to recall a Beoworld member stripping the paint off with nitromorse paint stripper to obtain a match for the 4500 components. Obviously no abrasive papers or substances were used to do this as that would completely ruin the polished surface.

Chris.

Re: Beogram 4500 compatible with a Beomaster 3500?

Evan — Thu, 19 May 2011 11:00:18 GMT

Glad you liked the white 4500 project. I say do it!

Your thread has reminded me, I need to finish some things on my 4500 pieces.

Re: Beogram 4500 compatible with a Beomaster 3500?

Dave0280 — Thu, 19 May 2011 10:54:17 GMT

Fantastic - thanks gents, look forward to a little restoration project....

Re: Beogram 4500 compatible with a Beomaster 3500?

joeyboygolf — Thu, 19 May 2011 10:29:33 GMT

I confirm that the only difference is the cosmetic finish. They are 100% interchangeable.

Re: Beogram 4500 compatible with a Beomaster 3500?

hemenex — Thu, 19 May 2011 10:05:56 GMT

Hello Dave,

according to the service manual there's no difference between CD3500 and CD4500 except the 3 mechanical parts chassis, cover & top plate.

So this should run smoothly

Gunther

Beogram 4500 compatible with a Beomaster 3500?

Dave0280 — Thu, 19 May 2011 09:31:30 GMT

Hi all - I've acquired over time a Beocord 3500, a Beomaster 3500 and recently a Beogram 4500 CD. Will the 4500 seemlessly go into the setup. The tops are pretty tired on all so i'm thinking a restoration project and possibly a chrome finish for all or paint all the tops gloss white like i've seen on a thread on here and it looked fantastic.

Dave