https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/325057.aspxWed, 18 May 2011 04:52:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:325057Peter0https://archivedforum.beoworld.org:443/forums/thread/325057.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=325057<p>I would suggest talking to Steve at Sounds heavenly - Beolabs are expensive and I wouldn&#39;t risk them for the sake a few pounds of cable. Essentially you will be adding a large resistance to the cable which will reduce the output to line level so it will work. </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/325019.aspxTue, 17 May 2011 13:57:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:325019Earle0https://archivedforum.beoworld.org:443/forums/thread/325019.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=325019<p>My home theater amp has NO line level outputs. The ony option I have are the actual speaker out (which are spitting out 60w!). I know NOT to connect that directly to the beolab line-in&#39;s. My question is, will a speaker-to-line-level converter work (the same kind usually used for old car stereos), and if it will still allow me to control the volume of the speakers using the amp&#39;s volume control.&nbsp;</p> <p>I am aware of attenuated cables, but not many manufacturers produce them, and the pricepoint is less than attractive for me at this point.</p> <p>Any experience hooking up active speakers to an amp WITHOUT volume controlled line level outs will help!</p><div style="clear:both;"></div>