General Forum

Re: Replacement Batteries for Beocom2 and Beo5

futurist — Sun, 25 Sep 2011 10:03:25 GMT

Thanks for the advice guys. I've managed to get the retaining ring out, once I realized what was doing. Unfortunately, being the klutz that I am, I managed to break the small white plastic clip to which three wires were connected and which plugs into the magnetic plate on the base.

Is it possible to fix this? Each wire has a flat section at its end which slots into the (now broken) clip. Can new clips be bought? And is it simply a matter of pushing the wires back in? Looks fiddly but potentially doable.

Not knowing anything about electronics, I'm not even sure what this clip/connector is called. Advice welcomed...again!

Re: Replacement Batteries for Beocom2 and Beo5

Evan — Sat, 24 Sep 2011 22:54:28 GMT

There are many versions of those type of pliers. The popular American synonym is "snap ring" plier. From my experience with snap rings, I have found best results with the straight version.

An example:

I've never changed a BeoCom 2 battery before so I could be completely wrong. Just some friendly hardware experience!

Re: Replacement Batteries for Beocom2 and Beo5

futurist — Sat, 24 Sep 2011 19:53:48 GMT

mbee:

I've done that with 2 Beocom 2 MK1, but there was 2 types of "internal ring" (I've got pictures, but I'm not at home)

Thanks - pictures would be great (when you get home).

Re: Replacement Batteries for Beocom2 and Beo5

Leslie — Sat, 24 Sep 2011 13:55:57 GMT

Finally got an answer, thank you!

Re: Replacement Batteries for Beocom2 and Beo5

mbee — Sat, 24 Sep 2011 11:23:41 GMT

Just use it to reduce the diameter of the ring. Pull the ring, and then you can gently remove the battery.

Then disconnect the battery, reconnect the new one, replace the ring and re-screw the bottom. Done!

I've done that with 2 Beocom 2 MK1, but there was 2 types of "internal ring" (I've got pictures, but I'm not at home) one was a disc, the other was a ring. If it's the disc, you just have to turn to release. But it's a bit tricky to replace everything so make sure you remember the EXACT position of the disc. Then you will have to re-screw the bottom on the disc, that's the tricky part. If something is misplaced, it doesn't work...

Has anyone found a source for "normally priced" Beo5 batteries?

Re: Replacement Batteries for Beocom2 and Beo5

futurist — Sat, 24 Sep 2011 07:14:45 GMT

Leslie:

root:

B&O uses that plier to remove the ring:

http://www.knipex.com/index.php?id=1216&L=1&page=art_detail&parentID=1365&groupID=1453&artID=1673

replacement battery packs may be ordered from B&O for both the Beocom2 and the Beo5 (for silly prices altough)

Have to replace my Beocom 2 battery and have this plier. Still don't know how to use it.

I can see 2 holes in the retainer and can put the plier-pins into these holes but what to do next. Do I twist?

Hi Leslie

Did you work out what to do with the pliers? I've had a look but am afraid of breaking something. Anyone?

Stuart

Re: Replacement Batteries for Beocom2 and Beo5

Leslie — Sat, 25 Jun 2011 14:47:28 GMT

root:

B&O uses that plier to remove the ring:

http://www.knipex.com/index.php?id=1216&L=1&page=art_detail&parentID=1365&groupID=1453&artID=1673

replacement battery packs may be ordered from B&O for both the Beocom2 and the Beo5 (for silly prices altough)

Have to replace my Beocom 2 battery and have this plier. Still don't know how to use it.

I can see 2 holes in the retainer and can put the plier-pins into these holes but what to do next. Do I twist?

Re: Replacement Batteries for Beocom2 and Beo5

Flappo — Wed, 25 May 2011 00:44:04 GMT

My branch charged me £80 !

Re: Replacement Batteries for Beocom2 and Beo5

harrykym — Mon, 23 May 2011 08:39:31 GMT

B&O King Street Manchester will do the Beocom2 battery for £20!!! and you can P&P to them.....

Re: Replacement Batteries for Beocom2 and Beo5

root — Thu, 28 Apr 2011 07:03:51 GMT

B&O uses that plier to remove the ring:

http://www.knipex.com/index.php?id=1216&L=1&page=art_detail&parentID=1365&groupID=1453&artID=1673

replacement battery packs may be ordered from B&O for both the Beocom2 and the Beo5 (for silly prices altough)

Re: Replacement Batteries for Beocom2 and Beo5

geearr — Tue, 26 Apr 2011 03:56:55 GMT

Hi Peter

I replaced my Beocom 2 battery a few weeks ago and noted that the original battery was a Sanyo 3.6V, 3HR-AAAU with a small two pin connection and red and black leads. My replacement battery obtained from B&O was similar but not the Sanyo brand. Everything works OK now.

I have just taken my battery out of the Beocom 6000 and that one has the three pin connector and three leads that you are talking about. I will be replacing that with a Master CTB86 which just about looks the same. I guess it must be silly season for batteries at the moment – my camera battery has just given up the ghost as well. Perhaps we can blame all of that on global warming as well.

The battery swap on the Beocom 2 isn’t too difficult but you will need a circlip remover to release and take out the big plastic holder which lies on top. An “L” shape hook to help pull it up and out is useful as well.

Sorry but cannot help you with the Beo5 question.

Regards

Geoff

Replacement Batteries for Beocom2 and Beo5

Peter Jacobs — Tue, 26 Apr 2011 02:08:21 GMT

Hi, it looks like both rechargeable battery packs for my Beocom 2 (6 years old) and Beo 5 (2 years old) have deteriorated and not holding any charge. Beocom 2 replacememts are available online BUT my battery terminal (the small white micro plug internally) has three thin black wires whereas the online replacement battery packs have just two (a red and a black) wires. Does anyone know if these replacements are still OK. Also, there appears to be a ring holding the battery pack in place internally, is there a special tool for removing this ?

The BEO 5 battery has also died. Don't want to p[ay over the odds at a dealer. Are these repairable with replacement battery packs ?

Thanks