General Forum

Re: Another Beosystem2 question

com2 — Thu, 19 Jul 2007 06:03:44 GMT

Another satisfied forum customer !!

Grateful for your answer - i ain't into all the cables n numbers etc just like to plug it in and go. But now i've got your advice above i'l now go on the hunt for the kit i need. thanks again Frog

Re: Another Beosystem2 question

frog — Tue, 17 Jul 2007 17:40:15 GMT

Check that the panel can handle VGA input at 50Hz otherwise it won't without extra help. From the brochure it looks like it can't - in which case you need to get a framerate converter between the panel and the BS2 (A CP251F from Lektropacks)

Secondly you won't be able to switch the panel on or off from the BS2 without another box (Lintronic) so you only need the VGA cable from the BS2 to the screen and with the framerate converter it should be OK.

If you want HD, you connect the STB directly to the screen - and if it is SkyHD, you'll have to connect it via a HDMI-DVI cable (DVI on panel side)

Another Beosystem2 question

com2 — Tue, 17 Jul 2007 15:48:44 GMT

Just about to take on a NEC 61MP1 plasma panel, but want to know if it can work with a Beosystem2.

If so - how would i go about it? ie cables/connectors etc

ta very much