General Forum

Re: Beosystem 4500

kallasr — Wed, 06 Apr 2011 02:36:58 GMT

If you cannot bid (ask the seller first), contact me, maybe I can help.

Best regards

Ralf

Re: Beosystem 4500

Jhrobts — Tue, 05 Apr 2011 21:01:14 GMT

Peter: Thanks again for your info. We did make all of the connections and everything is working including the remote. You were correct about the turn table and we had low volume. Not sure what we will do with that.
I am still hoping to find wall mount brackets so I can mount the 3 pieces on the wall. Anything more you can find out would be great.

Re: Beosystem 4500

Jhrobts — Tue, 05 Apr 2011 20:56:49 GMT

So there is one of the glass touch panels that is not sticking. What type of adhesive can I use to reattach it?

Re: Beosystem 4500

Stonk — Wed, 30 Mar 2011 08:01:27 GMT

Make sure the glass touch panels in each unit is securely fixed as they have a habit of falling off when wall mounted. The tape holding them fails with age.

Re: Beosystem 4500

Peter — Wed, 30 Mar 2011 07:21:56 GMT

Nice system - though the record player is not the correct model and does not usually work with this system - it uses an older language for linking and also does not have a built in RIAA, which it needs. I have a suspicion that you will get very low volume when you try to use it.

In the first event I would see if everythingt works. The CD player and Beocord will plug into the Beomaster via the captive 7 pin DIN plugs - the sockets are marked. Once plugged in, attach the speakers - if you have the twin grille S45, then these too have captive leads with 2 pin plugs which will plug directly into the Beomaster. You should also have two aerials - one will be a simple piece of wire - the AM aerial - with a two pin plug on the end and probably a T aerail with a co-axial plug. Attach these.

Did you get a remote? You will need one if you didn't! Attach to the mains and see if everything works. I'll see if I can find the mounting instructions!

Beosystem 4500

Jhrobts — Wed, 30 Mar 2011 06:15:22 GMT

I am a newbie to Beoworld. I saw this system mounted on a wall in a small audio store and fell in love. It was a complete system that I purchased. Packed in many boxes, I headed home. Boxes of beautifully slick pieces of equipment and wires and wires and wires.
Here is a list of what I have:
Beomaster 4500
Beogram 2404
Beogram CD 4500
Beocord 4500
Beovox S45

Does anyone have any type of instruction guide for wall mounting? I am supposed to have everything I need, but I just don't know what to do with all I have or anyway to confirm that I do have everything I need. I did download a user guide but nothing about the mounting part and brackets and what I actually need to do.

Any technical assistance or words of encouragement would be appreciated!