https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/314652.aspxTue, 15 Feb 2011 06:09:23 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:314652stefan0https://archivedforum.beoworld.org:443/forums/thread/314652.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=314652<p>The IR eyes are the same. They are both for receiving 455 kHz B&amp;O IR signals.</p> <p>But the one with the 5 wire cable got additional control like volume up/down, power on/off.</p> <p>The 3-wire version is just an IR receiver with 5V-, IR-signal- and ground wire.</p> <p>Stefan</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/314583.aspxMon, 14 Feb 2011 16:29:08 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:314583Saxpy0https://archivedforum.beoworld.org:443/forums/thread/314583.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=314583<p>&nbsp;</p> <p>In B&amp;O&#39;s ML-guide there are two different connections for external IR-eyes. One that is connected with a 3-lead cable via a 3.5mm connector and one that is connected using a 5-lead cable via a DIN connector.</p> <p>What are the extra two wires used for in the latter and is there any difference between different verions of the actual IR-eye.</p> <p>The reason for asking is that I have two plasma protected eyes (8087030). One is connected to a Lintronic box and the other one was supposed to be used for an active link kit. Is this possible or do I need a different IR-eye?<span style="font-family:Arial;font-size:x-small;"></span></p> <p>Any help is appreciated.</p><div style="clear:both;"></div>