General Forumhttps://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)Re: Masterlink via RJ45https://archivedforum.beoworld.org:443/forums/thread/314466.aspxMon, 14 Feb 2011 00:53:14 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:314466Heribert0https://archivedforum.beoworld.org:443/forums/thread/314466.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=314466I am using RJ45 sockets already without any problems. my dealer made some cables from RJ45 (wall sockets) to ML.<div style="clear:both;"></div>Re: Masterlink via RJ45https://archivedforum.beoworld.org:443/forums/thread/314118.aspxSat, 12 Feb 2011 05:13:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:314118YannChris0https://archivedforum.beoworld.org:443/forums/thread/314118.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=314118<p>Hello Ron,</p> <p>&nbsp;</p> <p>The New Installation Concept, using CAT7 wires and RJ45 connectors is out of the tube. It is compatible with ML products.</p> <p>Your dealer has been provided with a leaflet (available on pdf) discribing the concept, the requirements and the connectors/junction boxes.</p> <p>Ask him the file, there is an interresting FAQ section...</p> <p>Kind regards,</p> <p>Yann.</p> <p>&nbsp;</p><div style="clear:both;"></div>Masterlink via RJ45https://archivedforum.beoworld.org:443/forums/thread/314114.aspxSat, 12 Feb 2011 04:51:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:314114langleyav0https://archivedforum.beoworld.org:443/forums/thread/314114.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=314114<p>I want to rewire my Masterlink system with the newer RJ45 connectors. Does anyone have the approved connection pin details for distributing Masterlink via RJ45, as there seems to be a shortage of pins on the connector to supply all the required cable links.</p> <p>Ron</p><div style="clear:both;"></div>