General Forum

Re: Beolab 5000 vs 3000

tournedos — Wed, 09 Feb 2011 05:23:59 GMT

Yes, the slope difference in the frequency response will be quite shallow with that circuitry. It'll probably even out with one notch of the bass setting, if that.

The mechanical part of the amp swap will be 5 minutes with a Torx screwdriver, so not much of a problem either

Re: Beolab 5000 vs 3000

Peter — Wed, 09 Feb 2011 05:06:51 GMT

Thanks for the input, Guys!

Sounds great I don' t have to worry about the amplifier then...

/Peter

Re: Beolab 5000 vs 3000

Peter — Tue, 08 Feb 2011 18:14:12 GMT

I agree!

Re: Beolab 5000 vs 3000

joeyboygolf — Tue, 08 Feb 2011 18:07:31 GMT

Never noticed a difference to be honest. I have several pairs, some genuine and some hybrid. Don't lose any sleep over it!!

Re: Beolab 5000 vs 3000

tournedos — Tue, 08 Feb 2011 17:10:24 GMT

Peter :

According to Tim Jarman, the 3000 amplifier has slightly more bass lift to compensate for the much smaller cabinet.

And circuitry for that is pretty much limited to a single resistor (added in 5000). It's all in the service manual...

Re: Beolab 5000 vs 3000

Peter — Tue, 08 Feb 2011 16:31:15 GMT

According to Tim Jarman, the 3000 amplifier has slightly more bass lift to compensate for the much smaller cabinet.

Re: Beolab 5000 vs 3000

mediabobny — Tue, 08 Feb 2011 16:28:23 GMT

Peter:

2. What is the difference between the amplifiers on the BL3000 and the BL5000? Is it the same?…or should I perhaps skip this offer and look for a original pair?

I'm 95% sure they're the same.

Re: Beolab 5000 vs 3000

burantek — Tue, 08 Feb 2011 16:23:07 GMT

Peter:
1. Is it possible to get new fabric to the BL 5000 "out of the box" ..just to replace the old ?

I, and I am sure a few others... would like to know a source for it, especially the blue.

On another note, I had considered using 3000's as front channels but was concerned that the displays would be too distracting. As it would be a shame to not use the displays -I think they are brilliant LINK room speakers.

Beolab 5000 vs 3000

Peter — Tue, 08 Feb 2011 16:19:52 GMT

Hi All!

I have a pair of Beolab 3000 connected to my Beovision AV 9000 and I am amazed how well they sound!! The natural, smooth sound, with lots of depth (probably thanks to the wall mount) and most of all I like the "sound picture"…how they define every instrument when playing music or every detail in a movie.. I have Beolab 8000 and 6000 connected to my BV 3 in the living room, but I must say…I am even more impressed with the warm, live sound of the Beolab 3000 in my bedroom!

My question:

I found a pair of Beolab 5000 for sale at a very resonable price but they probably need new fabric and the amplifiers have been replaced with amplifiers from a pair of BL3000.

1. Is it possible to get new fabric to the BL 5000 "out of the box" ..just to replace the old ?

2. What is the difference between the amplifiers on the BL3000 and the BL5000? Is it the same?…or should I perhaps skip this offer and look for a original pair?

/Peter