General Forum

Re: Beogram RX2/3300

tournedos — Sun, 06 Feb 2011 18:12:02 GMT

Craig:
Have you not got a Beocenter you can try it on? Can't think of any without a built in RIAA.

9300, all of the upright Beocenters, and Beocenter 2

But anyway, both of these record decks need a preamp, simple as that. But even without, you should hear at least something when you crank up the volume high enough.

Re: Beogram RX2/3300

Leslie — Sun, 06 Feb 2011 17:53:34 GMT

I have Craig but not connected, hide it somewhere in my closet (shame on me)

Will try it later, thanks!

Re: Beogram RX2/3300

Craig — Sun, 06 Feb 2011 17:48:57 GMT

Have you not got a Beocenter you can try it on? Can't think of any without a built in RIAA.

Craig

Re: Beogram RX2/3300

Søren Hammer — Sun, 06 Feb 2011 17:35:06 GMT

The 6500 is also without preamp i believe, and the 5500 has it, and it will worke fine with the Beograms who doesn't.

Re: Beogram RX2/3300

Leslie — Sun, 06 Feb 2011 17:17:15 GMT

Thanks guys, I reckon the Beomaster 6500 has the same "issue"?

Mut have a 5500 somewhere, that will work does it?

Re: Beogram RX2/3300

Søren Hammer — Sun, 06 Feb 2011 17:11:10 GMT

I am almost sure that the Beomaster 7000 didn't have a preamp on the phono input. Buy a standard phono RIAA pramplifier and you'll be fine

Re: Beogram RX2/3300

Eugene — Sun, 06 Feb 2011 17:07:17 GMT

specks say it is but it wont on AUX and perhaps not if you tried with RCA instead of DIN.

Beogram RX2/3300

Leslie — Sun, 06 Feb 2011 16:49:45 GMT

Silly question maybe but I have tried to connect RX2 and 3300 recordplayers on my Beomaster 7000, both on AUX and Phono but no sound at all. Is that because the Beomaster 7000 has no pre-amp?

Thanks, Leslie