General Forum

Re: Difference in Bv1 models

folkdeejay — Sun, 06 Feb 2011 16:26:46 GMT

These are a surprising amount for a small PCB - about £175UK as I recall.

Plus fitting - unless you do it yourself. The link board just clips into a multipin holder - rather like fitting PC memory.

Re: Difference in Bv1 models

kawo — Sun, 06 Feb 2011 15:09:54 GMT

I have one of the later models, with no ML module build in, but a ML socket. Took some time to figure out that I had to get the module and the socket was without function. Nice! But installing the module was quite easy.

The earlier models can not be upgraded.

Re: Difference in Bv1 models

Nickyg63 — Sun, 06 Feb 2011 04:13:08 GMT

thanks for the replies, the reason I ask is I bought a bv1 which i believe was a ls set and so did the seller! It turned out to be a bv1 with masterlink module. I have a bv1L in my bedroom aswell. So am I worse off or better off? I noticed the bv1 has powerlink sockets my bv1L hasn't.

Cheers Nick

Re: Difference in Bv1 models

benjnz — Sat, 05 Feb 2011 20:58:45 GMT

Oh well I have a 1 without that.

Does anyone have a ML module that would go in a BV1, as I'd like to hook it all up

Re: Difference in Bv1 models

Vienna — Sat, 05 Feb 2011 20:15:19 GMT

"LS": Could be used "STAND ALONE" or as a "LINK SLAVE" to acces sources of a "MAIN-TV / AUDIO System"
via ML/Antenna.

"L" : If equipped with a ML module it could be used either as a "LINK SLAVE" (V-Opt 5/6) or as a "MAIN-TV"
(V-Opt 1/2).

"L" : If equipped with an optional modulator module HF distribution to Link-TVs was possible.

Re: Difference in Bv1 models

joeyboygolf — Sat, 05 Feb 2011 17:28:58 GMT

LS is Link Slave. Used as bedroom or similar slave TV when linked.

Re: Difference in Bv1 models

Hiort — Sat, 05 Feb 2011 17:17:58 GMT

BV1 No Masterlink

LS Have masterlink and L have Masterlink. Not to sure about the difference here.

Difference in Bv1 models

Nickyg63 — Sat, 05 Feb 2011 15:55:25 GMT

Hi,

What are the differences between the bv1 models? bv1, bv1L, bv1LS? Cheers Nick