https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/312497.aspxTue, 01 Feb 2011 13:23:21 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:312497Leslie0https://archivedforum.beoworld.org:443/forums/thread/312497.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=312497<p>This is great and usefull information. Thanks Vienna<img src="http://forum.beoworld.org/emoticons/21.gif" alt="Yes - thumbs up" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/312482.aspxTue, 01 Feb 2011 11:05:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:312482Vienna0https://archivedforum.beoworld.org:443/forums/thread/312482.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=312482<p>Start at the beginning and read the B&amp;O installation book carefully ... <img src="http://forum.beoworld.org/emoticons/02.gif" alt="Big Smile" /></p> <p><a href="http://peecee.dk/upload/download/201423">http://peecee.dk/upload/download/201423</a></p> <p>PS: Q&amp;A page 20</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/312446.aspxTue, 01 Feb 2011 05:55:20 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:312446Seanie_2300https://archivedforum.beoworld.org:443/forums/thread/312446.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=312446Hello All I am currently putting in all cables that i will need for my lounge as the celing is going to be taken down etc. Now i am thinking that all cables that i cannot get to after plastering like powerlink etc should be installed with Cat7 from the main junction box to the speaker outlet on the wall. Where can i get cat7 to masterlink connectors that dont cost a fortune. Also i am thinking that from my bv7 to the ML junction box i have i say aswell use cat7 as its alot cheaper and MLink. This is where i am getting stuck ML shows as 9 pins plus 3 screen Cat7 = 8 pins and 1 screen How are they wired together so i can just crimp the cat7 straight into the junction box???<div style="clear:both;"></div>