https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/311085.aspxSun, 23 Jan 2011 14:27:13 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311085Stan0https://archivedforum.beoworld.org:443/forums/thread/311085.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=311085<p>I also recommend first fitting the pieces together without the wires to understand how it all fits together.</p> <p>I&#39;m a little confused about the previous poster&#39;s mention of the adapter plate - my memory was that the adaptor plate was for the wall mount, but I, as I said, I&#39;m confused...</p> <p>I found it easier to fit the stand to the BS5 vs. the BS5 to the stand.&nbsp; That is, I placed the BS5 face down on a carpeted floor, then twisted the stand on to it... </p> <p>However, you are correct, it is not easy...</p> <p>Stan</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/310917.aspxSat, 22 Jan 2011 10:17:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:310917f54349640https://archivedforum.beoworld.org:443/forums/thread/310917.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=310917<p>Hello!</p> <p>I assume that you have fixed the black adaptor plate with three screws on the table stand...</p> <p>First I would suggest trying to assemble BS5 and table stand without wires/cables because they may need much space and prevent you from connecting your BS5 with the black adaptor plate.</p> <p>You have to attach the BS5 with about 20 degrees turned clockwise to the table stand; the &quot;foot&quot; of the BS5 and the table stand fit together with only a small gap; then turn/rotate the BS5 anti-clockwise till it snaps in</p> <p>I also tried it on my own but could not attach the BS5 close enough to the table stand - there was a gap of about 5 mm -&gt; this was because of the cables; its much easer being two people - one who manages to pull back the cables while the other one attaches the BS5</p> <p>Greetings Elmar</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/310914.aspxSat, 22 Jan 2011 09:38:27 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:310914markebetts0https://archivedforum.beoworld.org:443/forums/thread/310914.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=310914<p>Would someone be able to advise me how I connect my Beosound 5 to the table top stand please?</p><div style="clear:both;"></div>