https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/310438.aspxTue, 18 Jan 2011 09:46:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:310438osc0https://archivedforum.beoworld.org:443/forums/thread/310438.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=310438<p>I have a Beocom 6000 base (triangle thing which includes a charger and base, the second is charger only) and two handsets;&nbsp;I think one handset is mark 1 and the other&nbsp;is mark 2 (I&#39;ve flipped the battery cover and seen two config holes on one and only one hole on the other). I am not sure if the base is mark 1 or mark 2.</p> <p>Previously, I was unable to register the mark 1 handset with the base&nbsp;but I&nbsp;reset the base and both handsets using the DOT 70008 and DOT 70009 commands which has fixed this problem. I can now register the mark 1 as handset 01 and mark 2 as handset 02, and vice versa.</p> <p>However, the problem is that after a while when I try using the&nbsp;mark 1, I get an engaged dial tone noise. Sometime you can leave it, or keep trying, and it generally does recover and reconnect. The mark 2 is always fine. Has anybody experieced this? Any suggestions for a fix? The battery is weak in the mark 1 so when I get home I will try swapping the power packs in the handsets.</p><div style="clear:both;"></div>