General Forum

Re: Amazing B&O dealer in Sheffield

mediabobny — Tue, 13 Dec 2011 00:23:40 GMT

That, and the design of the stand. It's perfectly balanced.

Re: Amazing B&O dealer in Sheffield

Bentleyman — Mon, 12 Dec 2011 13:27:58 GMT

Ahh thats interesting and useful to know guys - many thanks for that

I'm guessing the weight of the 9000 makes it stable enough, even in the upright position?

Regards

Re: Amazing B&O dealer in Sheffield

mediabobny — Mon, 12 Dec 2011 12:28:12 GMT

+1 Stand is perfectly stable wthout them. I don't even use the screws that attach the Beosound to the stand.

Re: Amazing B&O dealer in Sheffield

BeoGreg — Mon, 12 Dec 2011 12:08:14 GMT

Just to let you know that I use my BS 9000 on the upright position since october 2001 on table stand 2053, and I can assure you that you won't need those ugly stabilizers.

Unless you play basketball in your room or the blizzard is blowing, table stand is far enough stable.

Gregory

Re: Amazing B&O dealer in Sheffield

joeyboygolf — Sun, 11 Dec 2011 11:46:06 GMT

Generally, if it's in the box, it's got a part number.

Re: Amazing B&O dealer in Sheffield

Bentleyman — Sun, 11 Dec 2011 11:04:31 GMT

Graham,

Thanks very much for that info, I shall do as you suggest and check that out.

I was becoming convinced they were too small a part to have their own part number, and I was becoming even more doubtful as those 'in the b&o business' seemed to be a bit stumped as well! They didnt seem to be aware even of the stabilizers existance - I drew a blank both from Lifestyle and AVA-Bang & Olufsen Services.

Why someone has taken just one of the stabilizers out of the bag, and left the other has had me a bit perplexed - but I guess it had just been lost/misplaced somewhere along the way.

Thanks for your help.

Regards,

Re: Amazing B&O dealer in Sheffield

joeyboygolf — Sun, 11 Dec 2011 10:53:33 GMT

They are "3103372 Foot, set inc screws" which are not shown in the exploded view but are in the "Parts not shown" list.

These are supplied with every stand. If they are not the part that you require, what are they??????

They have a part number so should be orderable.

You are a "Gold" member so I suggest you look in the service manual on site and check for yourself.

Re: Amazing B&O dealer in Sheffield

Bentleyman — Sun, 11 Dec 2011 10:21:07 GMT

I've just pulled this at random straight off ebay.

http://www.ebay.co.uk/itm/B-O-Bang-Olufsen-Beosound-9000-Table-Top-Stand-2053-/250951046639?pt=LH_DefaultDomain_3&hash=item3a6dd915ef

See the stand pictured in the upright position - the two stabilizers can be seen clearly at each end of the stand. I'm missing one of these..

Re: Amazing B&O dealer in Sheffield

Bentleyman — Sun, 11 Dec 2011 09:54:07 GMT

SHEFFIELD:

Hi Michael,

I've had a look on exploded view for stand 2053, but can't see anything ressembling the part in the photo?

Nick

Nick,

It's a small accessory that came in a small plastic bag (along with screws etc) with the Stand 2053. Other BS9000 table stands I've seen on ebay are displayed with the stabilizers present - so I know they are around. Here's some more photo's of it.

It's obviously not a 'part' that is available and can be ordered seperately. It's too small for that. The two stabilizers simply came in a small plastic bag along with bracket stand 2053. And I'm starting to think that the only way to obtain one would be to buy a whole new stand! ~ obviously not going to do that. I was just hoping that someone, somewhere may have a spare stabilizer hanging around in the bottom of a drawer somewhere.....

If not then not to worry, I've tried Lyfestyle (which is where the stand came from), AV services, and now on here & no-one seems to understand the existance of such a stabilizer accessory, so i'm a little puzzled to be honest.

Anyhow, never mind, I might have a go at making my own or just use the stand in the lie flat position!

Regards,

Re: Amazing B&O dealer in Sheffield

joeyboygolf — Sun, 11 Dec 2011 08:43:59 GMT

SHEFFIELD:

Hi Michael,

I've had a look on exploded view for stand 2053, but can't see anything ressembling the part in the photo?

Nick

Unless it's a part of 3103372 Foot,set inc screws described in the parts not shown section??

Re: Amazing B&O dealer in Sheffield

SHEFFIELD — Sun, 11 Dec 2011 08:25:55 GMT

Hi Michael,

I've had a look on exploded view for stand 2053, but can't see anything ressembling the part in the photo?

Nick

Re: Amazing B&O dealer in Sheffield

SHEFFIELD — Sun, 11 Dec 2011 08:17:28 GMT

Thanks for the compliment, I remember your visit for advice regarding your BeoVision 7... Hopefully, David gave you the help that you required?

Thanks,

Nick

Re: Amazing B&O dealer in Sheffield

Leslie — Sun, 11 Dec 2011 02:29:28 GMT

"and treat the customer that wants an obscure low value spare part the same as the customer wishing to spend over £50k on a full system"

Bentleyman:

Hi Nick,

Here's a longshot tester for you.....

I'm looking for a small part of the table stand for a BS9000 (part 2053) - the stabilizer that helps the stability of the stand when used in the upright position. Picture below....

I'm looking for obscure low value parts as well

Re: Amazing B&O dealer in Sheffield

Bentleyman — Sat, 10 Dec 2011 18:31:07 GMT

Hi Nick,

Here's a longshot tester for you.....

I'm looking for a small part of the table stand for a BS9000 (part 2053) - the stabilizer that helps the stability of the stand when used in the upright position. Picture below....

I have all the rest of the stand in it's entirety, including the other stabilizer (the one pictured above) ~ just the other stabilizer has gone walkabout ...

If anyone happens to have a spare one lying in a toolbox or forgotton in the bottom of a draw, i'd be very grateful...

Regards,

Re: Amazing B&O dealer in Sheffield

Gazzab — Sat, 10 Dec 2011 18:06:49 GMT

Was in Sheffield b&o today asking for advice on cables etc... Went in just before closing. What an agreeable chap/store!