General Forum

Re: Beovox Panel Speakers

lausvi — Sun, 09 Jan 2011 14:07:41 GMT

The Beovox panel speakers CAN be mounted to wall by just having two long screws with big head on the wall (ie. leaving them about 2-3cm from the wall). My BV3000s have been on wall like this for about a year now without any problems. A wall bracket would, of course, be the best option, especially for the heavier Beolab models.

Re: Beovox Panel Speakers

Vienna — Sun, 09 Jan 2011 13:36:29 GMT

Go to

http://www.stbbrackets.co.uk/?page=proddetail&catID=20&ProdID=1066

and open/print the tech-specs-pdf

Mounting is easy - install the STB-WB level to the wall - and put the panel speakers up

Re: Beovox Panel Speakers

newbeo — Sun, 09 Jan 2011 12:24:22 GMT

Are the set screws what goes through the holes in the brackets on the back of the speaker itself?

Re: Beovox Panel Speakers

Evan — Sun, 09 Jan 2011 12:03:59 GMT

Not all four, only the top two. There are also some set screws that help hold the speaker on the bracket.

Re: Beovox Panel Speakers

newbeo — Sun, 09 Jan 2011 11:55:58 GMT

Cheers for the responses does anyone have a decent photo of what they should look like the on the website is not that clear. The speakers seem to have a plate in each corner with a spigot at 90 degrees to the panel with a hole in it should it attach on all four corners? Thanks

Re: Beovox Panel Speakers

Leslie — Sat, 08 Jan 2011 17:58:44 GMT

Or make them yourself. It's not so hard to do. Just a piece of metal with 4 holes!

Re: Beovox Panel Speakers

Vienna — Sat, 08 Jan 2011 14:39:30 GMT

... you'll need special brackets - the original ones have been discontinued years ago -
but fortunately STB-Brackets are producing replacement brackets ...

http://www.stbbrackets.co.uk/?page=proddetail&catID=20&ProdID=1066

Beovox Panel Speakers

newbeo — Sat, 08 Jan 2011 13:57:23 GMT

HI can anyone give any advice on how these mount to the wall, is there a special bracket? Have just bought a second hand pair but think they are incomplete. Thanks,