General Forum

Re: Powerlink "Y" 's....

Frank Rizzo — Fri, 13 Jul 2007 14:24:33 GMT

Hey beo-ap, Great!! What city?? I'm in Cali and Medellin....though the US now. We're doing a BS9000 connected to an A/V7000 on to Pentas and 8000's with a CX100 center speaker....then doing active and passive links throught. It's a learning experience..for sure..

Do you travel back often?

Re: Powerlink "Y" 's....

beo-ap — Fri, 13 Jul 2007 14:03:33 GMT

What are the chances of meeting a Colombian here. I was born in Colombia, but have lived in the USA all my life. Good luck with the project.

Re: Powerlink "Y" 's....

Frank Rizzo — Fri, 13 Jul 2007 12:42:39 GMT

Hi Andy,

I live in the US part time and in SA part time...so everything goes to Miami and then it gets air freighted to Colombia.... It's time consuming and expesive...so you really have to think things out completely before moving...

Greetings from Colombia....

Re: Powerlink "Y" 's....

Jandyt — Fri, 13 Jul 2007 09:35:06 GMT

Just out of curiosity, Keith. Do you have a nearby dealer in Colombia?

Andy T.

Re: Powerlink "Y" 's....

Frank Rizzo — Thu, 12 Jul 2007 19:18:29 GMT

THANKS ~!~ That takes care of it....much appreciated...K

Re: Powerlink "Y" 's....

DoubleU — Thu, 12 Jul 2007 16:04:32 GMT

The Y-adaptor would be an absolute no-go for me, in combination with a bl8000, unless I could hide it. There could be coming a (beautiful) rubber snake, coming out of the back of this speaker.

Just solder, (or let somebody do it for you,) 2 powerlink-leads to 1 plug. Another option is using one lead for each speaker.

Re: Powerlink "Y" 's....

The Stig - ver. 1.7 — Thu, 12 Jul 2007 15:37:49 GMT

Get the long Y powerlink 1,6m then it doesn't have to sit at the back of speaker (order n. 6270705)

Re: Powerlink "Y" 's....

The Stig - ver. 1.7 — Thu, 12 Jul 2007 15:27:26 GMT

Yes it has a Physical switch: Right, Left and Line. I think A/V 7000 only has Pro logic so the Rear plays mono normally, and only stereo in speaker 4...

Re: Powerlink "Y" 's....

Frank Rizzo — Thu, 12 Jul 2007 15:16:49 GMT

hey again guys...

so...is there a physical switch on the speaker..??? or is it hardwired internally to only pick up the correct pin config. off the Powerlink??

ALSO...this is for the REAR channel of the A/V 7000 surround sound processor.....!!!

thanks, k

Re: Powerlink "Y" 's....

355f — Thu, 12 Jul 2007 14:53:50 GMT

mecca:

355f, just to be clear....we're talking R and L...both coming off the same powerlink from the main unit...then putting a "Y" after the first (R) speaker and running that on to the (L) rear speaker?????
Thanks, K

Thats correct!

Re: Powerlink "Y" 's....

joeyboygolf — Thu, 12 Jul 2007 14:11:40 GMT

Every powerlink lead carries right and left information. You can use splitters as much as you like and you will still get right and left info. That's why the R and L switches are in the speakers.

Re: Powerlink "Y" 's....

Frank Rizzo — Thu, 12 Jul 2007 14:01:51 GMT

355f, just to be clear....we're talking R and L...both coming off the same powerlink from the main unit...then putting a "Y" after the first (R) speaker and running that on to the (L) rear speaker?????

Thanks, K

Re: Powerlink "Y" 's....

Frank Rizzo — Thu, 12 Jul 2007 13:59:53 GMT

Thanks Ferrari...nice ride..... ..i've got some "y"'s from before..... this project is in Colombia, S.A., so EVERYTHING...has to be shipped in......it's comming along..

THanks again...

Re: Powerlink "Y" 's....

355f — Thu, 12 Jul 2007 09:24:09 GMT

Buy the Y adaptor from B&O in fact I have an unused one that I purchased some 4 months ago( as I have 4x8000 ) together with the thick 25 mtre powerlink lead and if you like will sell it to you at half retail price! PM me if you want it!

Powerlink "Y" 's....

Frank Rizzo — Thu, 12 Jul 2007 09:15:46 GMT

I've got the 2 back speakers (8000's) that are being used as rear speakers in a home theatre set up.....

Do I have to run 2 separate Powerlink (8 wire).....runs from the A/V7000 to the back......OR.....can I make 1 Powerlink cable to the rear of the room and then add a "Y" there and to each 8000 speaker...???

Thanks,