General Forum

Re: LX5500

Stonk — Wed, 15 Dec 2010 04:49:05 GMT

You can test the remote's buttons by using your camera phone or digital camera as shown HERE

Re: LX5500

david707 — Wed, 15 Dec 2010 03:57:14 GMT

You could try a different remote control - sometimes the buttons can stop working. Check this only if you don't see the confirmatory sign which should be displayed on the screen when you press the button.

David

Re: LX5500

htiek — Tue, 14 Dec 2010 05:21:12 GMT

Thank you both for your help, I have managed to configure scart 1 as Sat. and the DVD player

now works with that input.

Further advice would be appreciated, the MUTE does not work, VOL UP/DOWN is ok

any ideas?

Thanks

Re: LX5500

Die_Bogener — Sun, 12 Dec 2010 05:49:47 GMT

It's possible, that S-VHS input is activated.

Its a toggle function and stored for every output device, Shift-9.

Configure it for V-Tape1 (just press VTAPE) and V-Tape2 (Shift-VTAPE).

Or use SAT instead of VTAPE2. SAT is available if no internal LM-Sat receiver is installed.

Re: LX5500

Daniel — Sat, 11 Dec 2010 14:18:15 GMT

You're on it. Use shift text to enter the menu. Use the arrows to assign scart 1 to wanted input (sat etc.)

LX5500

htiek — Sat, 11 Dec 2010 14:11:12 GMT

Hello,

My brother has just purhasesd a LX5500 from ebay to replace the same model that finaly gave up the ghost. It came with the rather nice heavy die-cast remote.

However no matter what I do i cannot get the TV to accept an input on scart 1. Scart 2 works fine with the matching VHS recorder and from my investigation it looks as if pressing SHIFT + TV should give access to scart 2 and SHIFT + TEXT allows some form of scart setup.

However SHIFT + ANY BUTTON does absolutlty nothing.

Any advice would be gratefully received.

Thanks htiek