General Forum

Re: BeoSound 5 and Slave Audio

Vienna — Mon, 13 Dec 2010 20:35:39 GMT

After changing components and/or (re)programming of options,
it's always a good idea to disconnect all components from the mains
for several minutes.

After restoring power wait a minute and repeat option programming.

Again disconnect all components from power and restore power after a
minute.

Wait a minute before starting the system.

This procedure should release a system ...

Re: BeoSound 5 and Slave Audio

fishta — Mon, 13 Dec 2010 18:18:55 GMT

There is no B&O TV in the room with the BeoSound 4 and I put in A.Opt 6 but if I choose n.music nothing happens. There are two link rooms with passive kits and if you select N.Music in them with the BeoSound 4 connected they turn on then off instantly. Without it connected it works perfectly. I haven't however tried selecting Cd in the link rooms though.

It almost feels as if the BeoSound 4 doesn't want to be in option 6 eventhough it accepts the option by the led flashing.

Any other clues??

Re: BeoSound 5 and Slave Audio

Spiros — Sun, 12 Dec 2010 02:26:20 GMT

So, have you tried it already?

Re: BeoSound 5 and Slave Audio

Spiros — Sat, 11 Dec 2010 08:41:25 GMT

It depends on where they are placed! If in separate linked rooms they should be set in A.Option 5 (If TV is also there) or 6 (If all alone). For N.Music and N.Radio just add these commends on your Beo4 or Beo5 and that's it.

BeoSound 5 and Slave Audio

fishta — Fri, 10 Dec 2010 14:38:17 GMT

Hi Guys

When setting up a BeoSound 5 as an audio master and having a BeoCenter 2 or BeoSound 4 as a slave what options do they need to be in and what do you need to tell them that they are slaves?

Thanks