https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/302624.aspxSat, 27 Nov 2010 17:06:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:302624Spiros0https://archivedforum.beoworld.org:443/forums/thread/302624.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=302624I would leave it a whole day out of power not linked etc </p>Then I would probably check again. Still if course even B&amp;O some times stop working !!!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/302623.aspxSat, 27 Nov 2010 16:55:34 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:302623koning0https://archivedforum.beoworld.org:443/forums/thread/302623.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=302623<p>Hamer<img src="http://forum.beoworld.org/emoticons/emotion-55.gif" alt="Idea" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/302613.aspxSat, 27 Nov 2010 15:48:02 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:302613sensotronic0https://archivedforum.beoworld.org:443/forums/thread/302613.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=302613<p>STILL DEAD&nbsp;<img src="http://forum.beoworld.org/emoticons/34.gif" alt="Super Angry" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/302607.aspxSat, 27 Nov 2010 13:51:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:302607Spiros0https://archivedforum.beoworld.org:443/forums/thread/302607.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=302607Any update? I think it is a very unpleasant situation. Any chance you might have a problem in the wall plug thus not giving sufficient power? Might be silly question but would prefer that instead of a TV failure/damage.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/302554.aspxSat, 27 Nov 2010 07:54:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:302554sensotronic0https://archivedforum.beoworld.org:443/forums/thread/302554.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=302554<p>switched on the BV7-40mk3 this morning to be greeted with the following</p> <p>No sound - speakers did switch on</p> <p>White LED info display full brightness and staying on</p> <p>No picture - screen in a state of standby no backlight nothing just DEAD</p> <p>no able to switch to TV DTV or RADIO CD</p> <p>Not able to switch to standby from remote or any connected link room, also link rooms failed to accept local commands via remote or keypad</p> <p>--------</p> <p>disconnected TV from the ML and power for 1hr, then powered up no ML just TV &nbsp;waited 30mins while in standy, the pressed DTV on remote and Nothing &nbsp;same symptoms as above &nbsp;TV is less than 4years old and still under warranty</p> <p>prior to this an engineer has replaced the pin module and twice the main board with the dvi and hdmi ports on &nbsp;it on sw9.x</p> <p>have contacted engineer, &nbsp;but wanted to get some help on here as I got no TV for the weekend</p> <p>&nbsp;</p><div style="clear:both;"></div>