General Forum

Re: Beosound Ouverture output left speaker weak

DoubleU — Sat, 04 Dec 2010 13:43:39 GMT

That's what I said allready in my previous reply.

Anyway, glad you found it.

Re: Beosound Ouverture output left speaker weak

Solex — Sat, 04 Dec 2010 06:58:17 GMT

I got the solution on the Dutch forum.

On the female masterlink from the Ouverture 2 pins whre not exactly in row. When I fixed this, the sound is good now from both speakers.

Thanx for all your help.

Re: Beosound Ouverture output left speaker weak

Ehlerz — Mon, 29 Nov 2010 11:00:06 GMT

sorry did not see that the issue is also present when speakers connected directly to BS...

Re: Beosound Ouverture output left speaker weak

Ehlerz — Mon, 29 Nov 2010 10:58:25 GMT

had this issue aswell. Redid my ML connection in the junction box and that solved the problem. try borrowing a new ML cable and connect the tv and BS directly...

Re: Beosound Ouverture output left speaker weak

stefan — Mon, 29 Nov 2010 09:42:41 GMT

I think so too. Maybe a contact problem with the headphone socket, or the mute relay not working properly. I`d plug - unplug the headphone several times, and if this doesn`t help press the mute button several times. just a guess....

Stefan

Re: Beosound Ouverture output left speaker weak

Solex — Mon, 29 Nov 2010 03:25:08 GMT

With Beolabs direct to Ouverture the problem is still the same, so I think it has to be the Beosound Ouverture (output on headphone is o.k.).

Re: Beosound Ouverture output left speaker weak

DoubleU — Tue, 23 Nov 2010 16:27:15 GMT

ML cable is already replaced. (see 3rd reply)

But I think Stefan is on the right track. It is possible that one pin in the ML-socket is bend to the outside, not making contact with the ML-plug. Likely this happened on the BV10, because that socket is harder to reach than the side on the Ouverture. You might want to take a look at that.

Re: Beosound Ouverture output left speaker weak

stefan — Tue, 23 Nov 2010 16:06:49 GMT

Connect the Beolabs directly to your Ouverture. If the sound is ok, I`m quite sure, the ML cable is faulty. The Masterlink has balanced signal, thre wires for right channel (2x signal, 1x ground) and three for the left channel. If one wire is missing, there will be a signal, but less volume and bass.

Re: Beosound Ouverture output left speaker weak

Solex — Tue, 23 Nov 2010 15:39:37 GMT

Balance is in the middle. When I connect a headphone to the headphone out on the Ouverture the sound in the headset is o.k. So then the sound on left and right earphone is real stereo.

Re: Beosound Ouverture output left speaker weak

DoubleU — Tue, 23 Nov 2010 13:46:56 GMT

I'm not sure if this is effective in your setup, but did you check if your balance of your Ouverture is in the middle?

Re: Beosound Ouverture output left speaker weak

Solex — Tue, 23 Nov 2010 10:39:43 GMT

I'm sorry. I mean masterlink instead of powerlink.

Re: Beosound Ouverture output left speaker weak

stefan — Tue, 23 Nov 2010 08:22:09 GMT

Are you sure you have connected your Ouverture with the BV10 via a Powerlink cable? You have to use a Masterlink cable. The Powerlink sockets are all outputs , not inputs.

Stefan

Beosound Ouverture output left speaker weak

Solex — Tue, 23 Nov 2010 07:29:11 GMT

I have a beovision 10 with beolab8000 speakers. The soundfrom the beovision is perfect via the speakers.

The Beosound Ouverture is connected to the Beovision by a brand new powerlink cable. The sound from the left speaker is weak (rihgt is o.k). The problem is not the Beolab or powerlink; it has to be the Beosound. Who can help me what to do. Who can send me an electric schematic from the audio output. I downloaded the service manual from this site, but it is hardly to read what figure output is written.

Thnxs.