General Forum

Re: Puc codes for samsung stopped working

hagan — Wed, 23 Nov 2011 08:00:28 GMT

Codes for samsung bdp4600 has the eject function but is missing a lot more.

Re: Puc codes for samsung stopped working

hagan — Wed, 23 Nov 2011 07:43:22 GMT

I now use the specific codes for bd-c7500 and everything works perfectly. Bd player hangs at the back of the bv10 using stb brackets.

If I remember correctly I tried codes for another samsung and could then eject disc but many other commands didn't work.

Re: Puc codes for samsung stopped working

kallasr — Wed, 23 Nov 2011 07:28:43 GMT

Why don't you put/wall-mout the original remote there as well?
It should still work! It is not an either-or but the two remotes (beo 4 and orignal one) work side by side.
Push the orignal remotes eject button and that's it....

Ralf

Re: Puc codes for samsung stopped working

McBeo — Wed, 23 Nov 2011 07:22:09 GMT

My whole Blu ray player is hidden behind a extra front wall where also my tv is mounted.

Just the slot-in (Samsung BD-D7500) can be reached for putting the disc in/out. Now when I want to eject the disc I have to take the player from behind the wall to push the eject-button, which is located in the middle of the player and put it back behind the wall again.

A bit silly....

Re: Puc codes for samsung stopped working

kallasr — Wed, 23 Nov 2011 06:31:37 GMT

McBeo:

Is there also a way to eject the disc with the Beo-remote?

Why would you need this? If you want to take the cd/bluray out and put it back in the box you will need to go to the player anyway...
An eject button would need to be an eject-back in the box-in the sideboard-button ;-)

Ralf

Re: Puc codes for samsung stopped working

PapaJustify — Wed, 23 Nov 2011 05:49:40 GMT

Unfortunately the Eject command is not available in the generic Samsung Blu-Ray file!

What setup are you using? If your TV supports PUC flashing, I recommend that you check if there exists a specific PUC for your Samsung player and contact your Dealer for an update.

Re: Puc codes for samsung stopped working

McBeo — Wed, 23 Nov 2011 04:59:12 GMT

Thank you for the nice overview of the codes!

Is there also a way to eject the disc with the Beo-remote?

Re: Puc codes for samsung stopped working

kimhav — Sat, 13 Nov 2010 16:27:32 GMT

Big thanks for the answers; very helpful!

Re: Puc codes for samsung stopped working

hagan — Fri, 12 Nov 2010 06:09:26 GMT

Samsung Blue-Ray V02.00a

Beo4 Orginal

Go Enter

Stop Stop

Exit Return

Up Up

Down Down

Left Left

Right Right

Red Popup menu

Green Mode

Yellow Slow forw

Blue Slow Back

Menu/Go+

1 Menu

2 Disc menu

3 Info

4 Audio

5 Subtitle

6 A

7 B

8 C

9 D

Notice that Pause command doesn´t exist. Stupid in my opinion

Re: Puc codes for samsung stopped working

Opman — Thu, 11 Nov 2010 18:09:15 GMT

kimhav:

How do you check the BV10 software version

Press menu (twice if you have DVB HD module) to go into the TV menu. Highlight the options tab then press red + go. That takes you into the customer service menu. In here you can see which software build is currently in your TV. The latest software for BeoVision 10 and BeoVision8 40 is build 153. Amongst other things this cures the problem of the PUC loosing commands.

Opman

Re: Puc codes for samsung stopped working

Razlaw — Thu, 11 Nov 2010 17:15:23 GMT

Pressing menu should bring up a display on the screen that will tell you what commands are available.

Re: Puc codes for samsung stopped working

kimhav — Thu, 11 Nov 2010 15:29:51 GMT

How do you check the BV10 software version and regarding the Samsung BD; where do one find instruction on how to operate the unit using the Beo4? I figured out start stop, play and using the color buttons; but guessing that I'm missing a few...

Re: Puc codes for samsung stopped working

BeoNet84 — Wed, 03 Nov 2010 05:56:37 GMT

It is SW build 153 for your BeoVision 10. :-)

Re: Puc codes for samsung stopped working

hagan — Tue, 02 Nov 2010 14:40:28 GMT

Hi!

Ok, which software is to be changed. There are several different for different modules

Re: Puc codes for samsung stopped working

BeoNet84 — Tue, 02 Nov 2010 13:34:51 GMT

You need to update the SW of the beovision 10 as with the new build their is a fix for the stb. The stb stops working after 20 mins. Contact your dealer to get the update.