General Forum

Re: Beovision AV9000 switches off after 5 mins of viewing.

Leslie — Sat, 13 Nov 2010 14:23:58 GMT

Spiros, maybe you can help finding him on the German forum

Re: Beovision AV9000 switches off after 5 mins of viewing.

Spiros — Sat, 13 Nov 2010 04:51:45 GMT

I'm sure Ulf will short it out for you! Let me know progress!!

Re: Beovision AV9000 switches off after 5 mins of viewing.

Leslie — Fri, 12 Nov 2010 16:50:10 GMT

Spiros:
Maybe you can contact our member Ulf directly (usually posting on the German section) and discuss it with him.

Hi Spiros,

Placed a new thread on the German forum. Hopefully my German is ok and will Ulf respond!

Re: Beovision AV9000 switches off after 5 mins of viewing.

Spiros — Fri, 12 Nov 2010 00:32:24 GMT

hmmmmm. For me it was a 1 minute job after removing the back plate of the MCPAV. I'm not quite sure why this happened but also other people confirmed this to me that it worked for them. Maybe you can contact our member Ulf directly (usually posting on the German section) and discuss it with him. But as mentioned previously, this is also a standard procedure for the B&O Technicians as well when a Master Panel is brought for service (they cannot have the AV9000 as well!!!!!!).

Re: Beovision AV9000 switches off after 5 mins of viewing.

Leslie — Thu, 11 Nov 2010 17:45:32 GMT

Spiros:
Let me know if it did work out for you. Best regards Spiros

Hi Spiros,

To good to be true, it did not work! Made the link on the ML connector internally as you said (4 and 6) but no control and display on the Masterpanel. In fact, it doesn't make any difference with or without the link. It can be controlled via the Avant though but not by the Masterpanel itself Did I missed something beside soldering a link?

Re: Beovision AV9000 switches off after 5 mins of viewing.

Spiros — Mon, 01 Nov 2010 11:31:32 GMT

Leslie:
Spiros:
Hi Leslie, All buttons work perfectly on the MCPAV and you also see the source etc. Best regards Spiros

Thank you Spiros! Great

You are more than welcome. Let me know if it did work out for you. Best regards Spiros

Re: Beovision AV9000 switches off after 5 mins of viewing.

Leslie — Mon, 01 Nov 2010 03:46:48 GMT

Spiros:
Hi Leslie, All buttons work perfectly on the MCPAV and you also see the source etc. Best regards Spiros

Thank you Spiros! Great

Re: Beovision AV9000 switches off after 5 mins of viewing.

davefarr — Mon, 01 Nov 2010 03:37:14 GMT

I've sent you a PM with the engineers contact info.

Dave.

Re: Beovision AV9000 switches off after 5 mins of viewing.

adatia — Sun, 31 Oct 2010 17:25:53 GMT

Dave I'm in London, SW10. Thanks for your help.

Re: Beovision AV9000 switches off after 5 mins of viewing.

Spiros — Sun, 31 Oct 2010 15:46:12 GMT

Leslie:
Spiros, thank you for sharing these hintfull tips!

One more question though about the Masterpanel , does that mean the functionality of the display and keyboard can be used?

Leslie

Hi Leslie, All buttons work perfectly on the MCPAV and you also see the source etc. Best regards Spiros

Re: Beovision AV9000 switches off after 5 mins of viewing.

davefarr — Sun, 31 Oct 2010 14:49:11 GMT

To the original poster (adatia)- where are you?. If you're in the South of the UK, I may be able to give you the number of someone who can come to your house to look at it. He's done this already with another AV9000 owner who was going to sell hers as non-working but he fixed it in 30mins.

Dave.

Re: Beovision AV9000 switches off after 5 mins of viewing.

Leslie — Sun, 31 Oct 2010 12:03:37 GMT

Spiros, thank you for sharing these hintfull tips!

One more question though about the Masterpanel , does that mean the functionality of the display and keyboard can be used?

Leslie

Re: Beovision AV9000 switches off after 5 mins of viewing.

Spiros — Sun, 31 Oct 2010 10:34:41 GMT

You are more than welcome. Please let me know if it works for you.

Re: Beovision AV9000 switches off after 5 mins of viewing.

adatia — Sun, 31 Oct 2010 08:08:31 GMT

Spiros - thank you.

Re: Beovision AV9000 switches off after 5 mins of viewing.

Spiros — Sun, 31 Oct 2010 07:56:21 GMT

Hi Leslie and Adatia, It was an advice from my friend Ulf and it worked directly without any problems. You have to connect (bridge) the pins 4 & 6 in the Master control Panel which for B&O is the test mode. It works like a charm!!! Hope this helps. Best regards Spiros