General Forum

Re: Just a couple of questions...

stotty1111 — Sun, 31 Oct 2010 03:37:15 GMT

Having now thought about it I had the same problem some time ago with one of my setups, didn't get resolved, but may be a software problem however reverting back to a bl1000 solved it ie shift radio - maybe if you have shift listed then that might work with radio to bring up phono give it a whizz

Re: Just a couple of questions...

Bentleyman — Sat, 30 Oct 2010 20:34:50 GMT

Ohh thanks guys - i got it now.

Yes N.Radio works the phono now.

And I've got into the service menu on my BV5, I will try the same thing on my other two sets, just out of interest.

Many thanks to you guys.

Michael

Re: Just a couple of questions...

Bv7Mk3 — Sat, 30 Oct 2010 19:40:14 GMT

Ooops forget that bit in my answer...set up

Re: Just a couple of questions...

Doctor — Sat, 30 Oct 2010 15:29:56 GMT

Service menu: Start with the set off. press in the following order:

scroll down to SET UP

then press 0 0 GO quickly. You will be in the service menu. ( DON'T PLAY WITH THE SETTINGS! )

On the Beo4, you need to add N.Radio to your LIST. Which Beo4 do you have? Normally, you just press stand by and LIST at the same time. Scroll to ADD? and press GO. Press LIST to scroll through the choices. The relatively old version I have gives me the choice of both PHONO and N.Radio, which as Graham quite rightly says is the same actual command.

Re: Just a couple of questions...

Bentleyman — Sat, 30 Oct 2010 15:15:26 GMT

stotty1111:

IS A AUX LISTED if it is does that work?

tony

Ha ha...thanks Tony...but no that doesnt work either. 'A AUX' comes on my penta displays but wont turn on my phono.

Didnt think it would be difficult one for you B & O experts...hahaha

Any more ideas at all...anyone...?

Re: Just a couple of questions...

stotty1111 — Sat, 30 Oct 2010 15:00:08 GMT

IS A AUX LISTED if it is does that work?

tony

Re: Just a couple of questions...

Bentleyman — Sat, 30 Oct 2010 14:25:43 GMT

Bv7Mk3:

For the Bv 5 try....Menu 0,0 then press go,should bring up the service menu!

Thanks for your try, but....

Nope, that doesnt work either.........that bring up timer settings....

Anybody else got any ideas on either issue.? 1) Phono adding on Beo4 2) Bring up the service menu on bv5, Avant & mx4000...?

Cheers,

Michael

Re: Just a couple of questions...

Bv7Mk3 — Sat, 30 Oct 2010 11:39:25 GMT

For the Bv 5 try....Menu 0,0 then press go,should bring up the service menu!

Re: Just a couple of questions...

Bentleyman — Sat, 30 Oct 2010 11:27:56 GMT

joeyboygolf:

It doesn't appear in some s/w issues. Try N RADIO, it's the same command!

Thanks for your suggestion Graham, but I dont seem to have N.Radio, I have N.Music option - tried that & that switched on Tape2 rather than phono....

Any more ideas..?

And can anyone help with the Service Menu on my tv's...? (as in hours many hours use they've had etc..)

Cheers

Re: Just a couple of questions...

joeyboygolf — Sat, 30 Oct 2010 09:21:41 GMT

It doesn't appear in some s/w issues. Try N RADIO, it's the same command!

Just a couple of questions...

Bentleyman — Sat, 30 Oct 2010 08:38:21 GMT

Hello Guys (and maybe girls),

Couple of quick queries.....

1. How do I add 'phono' to my Beo4. I've been into 'add' and scrolled through quite a long list of possibilities - but 'Phono' doesnt appear. My earlier Mk.1 beo4 had phono in it's list, but not this newer one....?

2. How do I pull up the Service Menu on a BV5 and on an Avant, and on a MX4000. When i say service menu, I'm wanting to look at the statistics of how many times set has been turned on/off, how many hours its been in use etc...?

Cheers guys..

Michael