General Forum

Re: Pre-Amps with non-RIAA Beograms

joeyboygolf — Wed, 20 Oct 2010 16:52:47 GMT

iainwood:

Anyone know a good source of convertors for DIN plugs to standard phono ones?

At the bottom of the page!!..... www.soundsheavenly.co.uk

Re: Pre-Amps with non-RIAA Beograms

iainwood — Wed, 20 Oct 2010 13:26:39 GMT

Thanks everyone for the advice.

Anyone know a good source of convertors for DIN plugs to standard phono ones?

Re: Pre-Amps with non-RIAA Beograms

Søren Mexico — Wed, 20 Oct 2010 10:26:39 GMT

http://www.tnt-audio.com/ampli/t-preamp_e.html Read this, I've been using it for 5 years now, no problems no distortion, what comes in comes out, and you have the choice of 3 extra incoming connections. Run it with my BG 2404, Ipod, computer, flatscreen, to BS 3000

Soren

Re: Pre-Amps with non-RIAA Beograms

ajames — Wed, 20 Oct 2010 05:52:49 GMT

I've been using the NAD for a while with an old TX - I tried a cheaper one the other day and it did sound thin in comparision, so switched back to the NAD. It is quite sensitive to picking up noise from transformers etc but works great once you've got it in the right place.

I guess so much depends on the cartridge and turntable you are using as well. It would be good to have some sort of guide to good pre-amps and which ones people recommend from experience. This would be useful given that all the recent stuff doesn't have a preamp built in and the huge premium that is being charged for B&O turntables with built in pre-amps.

Re: Pre-Amps with non-RIAA Beograms

Alex — Wed, 20 Oct 2010 02:12:07 GMT

The Nad PP1 is pretty good - I have one and think it sounds fine. I also have a ProJect Phono Box though which is especially fab.

The pre-amp really does leave quite a big mark on the sound...

Re: Pre-Amps with non-RIAA Beograms

macjonny1 — Tue, 19 Oct 2010 19:25:37 GMT

I'm no expert but I think any decent quality preamp will do. In fact, I think you can have better sound with a separate preamp compared to the built in B&O one. Considering separate preamps can go for thousands of dollars, the sky is the limit in terms of what you can spend.

Pre-Amps with non-RIAA Beograms

iainwood — Tue, 19 Oct 2010 17:09:57 GMT

Hi,

This is probably a common question, sorry I'm new to this forum, but what is the requirement / specification for a suitable pre-amp to connect non-RIAA Beograms to a standard, non B&O amp? For example would a NAD Phono Preamp PP1 be suitable or do you need something more specialised?

Thanks in advance for your help.