General Forum

Re: Beosystem 6500 complete

Søren Mexico — Mon, 18 Oct 2010 12:05:16 GMT

Of to the work bench, thread First check Beosystem 6500

Re: Beosystem 6500 complete

Søren Mexico — Sat, 16 Oct 2010 08:40:47 GMT

Medogsfat:

Søren Mexico:

Should I start another thread in another forum or stay here until I maybe start repairing ?

Soren

I would start a thread in the workbench section as these threads tend to drift off the page fairly quickly in the general section.

Chris.

Will do as of tonight or tomorrow, whatever comes first, now of to work.

Re: Beosystem 6500 complete

Medogsfat — Sat, 16 Oct 2010 08:33:54 GMT

Søren Mexico:

Should I start another thread in another forum or stay here until I maybe start repairing ?

Soren

I would start a thread in the workbench section as these threads tend to drift off the page fairly quickly in the general section.

Chris.

Re: Beosystem 6500 complete

Søren Mexico — Sat, 16 Oct 2010 08:21:51 GMT

As I woke up at 0500 this morning, I have been checking the manuals and have to atmid that things can get complicated, missing screws and strange steel and metal pieces I can handle without problems, surface repairs, dismanteling and mecanical ajustment also no problem, but when it comes to PCBs, chips and things where I have to guess the function, it will be a problem, I have lately followed Die Bogener and Dillens very good threads and I hope I have learned a little, at least I think I've learned what not to do, and to ask before doing something I'm not sure about. I have been repairing printing m/cs in more than 50 countries throughout the world and I'm used to failure finding, which sometimes is time consuming and kind of detective work, but I'm here in a kind of work where I have little knowledge and experience.

I like this its something new

Well the plan:

1. Make a good working space to test all Units.

2. Provide 220 V near point 1.

3. Before connecting the units, open them to check for visible damage, make photos

4. Start with the BG, that one I can connect to my BS 3000.

5. Buy flowers for my wife, and get Valde to find documentation for the Items and maybe the original reciept and where he bought it.

Should I start another thread in another forum or stay here until I maybe start repairing ?

Soren

Re: Beosystem 6500 complete

Step1 — Sat, 16 Oct 2010 06:07:49 GMT

That record player looks so sweet in white and as for those RL140's, Very nice!

Re: Beosystem 6500 complete

soundproof — Sat, 16 Oct 2010 05:52:50 GMT

Søren, you're not helping. There are three white components available where I live, and I'm doing my best to convince myself that I do not need them now. (No CD.)

Congratulations - and agreed, I can understand why seeing the MMC2 on the tonearm was a shocker. I take it the tonearm wasn't even secured?

And platterclatter during transport is always fun.

Re: Beosystem 6500 complete

Iconic-AV — Sat, 16 Oct 2010 05:12:03 GMT

Gorgeous white rl140s, thats the first pair ive seen thanks for the pictures,

Chris is right about the screw at the back, if you havnt got the originals you want a way of adding a rubber stopper to the end of the screw where it sits against the stand to stop vibration

Are you going to recover them in white fabric?

Re: Beosystem 6500 complete

Medogsfat — Sat, 16 Oct 2010 04:27:11 GMT

Tilt angle adjustment is done by a screw. It is a standard metric (cannot remember what size) Phillips screw which should be in the bottom threaded hole of the plate around the hole in the back of the speaker where the stand bracket fits. I think there are 4 of these holes to place this screw & will depend on the orientation you choose as to which hole to use. Pretty simple stuff really but it works.

Chris.

Re: Beosystem 6500 complete

Søren Mexico — Fri, 15 Oct 2010 21:22:13 GMT

I just coud'nt leave these nice items in my garage, I now have them in my living room, if you never hear from me again, my wife killed me.

Re: Beosystem 6500 complete

Søren Mexico — Fri, 15 Oct 2010 20:53:24 GMT

Medogsfat:

Very nice indeed

Never seen white line RL140's before. The bass drivers are likely to need refoaming so have fun with all the screws holding the cabinets together

Chris.

No problem I like screwing around.

I was checking the speakers, with an old Radio Shack amp, I do not get to much bass and in one speaker dirty highs.

I did put one speaker on the stand, its pointed to the floor, and I do not find any ajustment to point it upward, photo below.

I took of the plastic wrap from the BG, and what did I find, on the cantilever an MMC 2, no transport security platter wobling, but I'm a tuff guy, I did'nt get nerveus, but I did stop every forther moove, vent to my bar and mixed a strong Rum and coke, after a smoke and half the drink I very carefully disengaged the cartridge from the cantilever, shouted to my family to stay put and very slow went through my house, considering every step, and put the cartridge on my old BG 2404, Haendels Firework music Ouverture, La paix: Largo alla Siciliana, HA I'm going to buy an SMMC 2 for myself, my old MMC 4 is going to be used for lesser black magic. It came out just beautiful from my BLs 8000.

Now take a look at the stand and tell me something

Tomorrow I'm goanna unpack the rest, try to get the BG open and if posible check if it can play as beautiful as my BG 2404

Re: Beosystem 6500 complete

Medogsfat — Fri, 15 Oct 2010 18:04:31 GMT

Very nice indeed

Never seen white line RL140's before. The bass drivers are likely to need refoaming so have fun with all the screws holding the cabinets together

Chris.

Re: Beosystem 6500 complete

j0hnbarker — Fri, 15 Oct 2010 17:07:49 GMT

I have a soft spot for RL140s. They look awesome in white :)

Beosystem 6500 complete

Søren Mexico — Fri, 15 Oct 2010 17:05:12 GMT

Somebody somewhere on one of the forums asked for pics of RL 140, that triggered my still somehow functioning kind of brain.

I came to think of my good friend Valde, some years ago he had some white B&O standing in a corner in his apartment, on later visits I didnt see it, but 2 days ago I asked him where it went and what it was.

Gentlemen may I present a Beomaster 6500 White, a Beocord 6500 White, a Beogram CD 6500 White, a Beogram 6500 White, remote console White, and my dear Sirs 2 pieces Red Line 140 WHITE.

It was delivered to me today for checking and maybe repair.

Here the arrival pics

I told him to pack better, but

Speakers

Stands

BEAUTIFUL

The other Speaker is just like this one, now I will connect the speaker to an Amp to see and I hope hear something.

Reports of all units will follow.