General Forum

Re: Beolink passive 1658 connected to ipod to RL 60.2- can it be done?

sodoi18 — Tue, 05 Oct 2010 15:00:09 GMT

Updating my own post.

1. I certainly need a mk2 powerlink to connect from the wireless to passive amp.

2. The ML may be not working as its a link(passive) via link(wireless) to the source (ouverture)

If any one out there willing to sell a used powerlink mk2in USA let me know

Thanks

Re: Beolink passive 1658 connected to ipod to RL 60.2- can it be done?

sodoi18 — Mon, 04 Oct 2010 21:14:44 GMT

I tried connecting to my beosound 4000 via a beolink wireless and then ML to passive. Also had two IR eye controls connected to wireless and passive. I was able to control the beosound via wireless. However, every time I try to switch passive on Using it's IR the passive switches on for few seconds and then gets into standby. I have given up working on this tonite. Please suggest how to get the passive provide the sound To my RL 60.2. Directly connecting to beosound 4000 works but I want to create a link room with Passive and RL 60.2 I have two IR, iPod to power link, beolink wireless. Thanks

Beolink passive with ML installation issues

sodoi18 — Mon, 04 Oct 2010 18:34:51 GMT

I am trying to connect my iPad to the beolink passive via 3.5 mm to power link 5 pin The passive is connected to RL 60.2. The set up ready but it's not switching on. Using ir eye to control with beo4 Iam not sure what is wrong. The amplifier worked fine when connected via ML cable. I want to put this setup in basement with a dedicated iPod. Is there anything wrong? Do i need a more than 5 pin cable connected from the iPad Thanks