https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/296521.aspxMon, 04 Oct 2010 15:21:25 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:296521joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/296521.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=296521<p>I have attmpted to answer in the Beogram section.</p> <p>&nbsp;</p> <p>@Mods&nbsp; I suggest this is moved as it is a duplicate&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/296512.aspxMon, 04 Oct 2010 14:58:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:296512Relaximus0https://archivedforum.beoworld.org:443/forums/thread/296512.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=296512<p>Herein lies part of the problem:&nbsp; The person I purchased it from did not engage the transport screws prior to packing and shipment.&nbsp; I fear something may have gotten tweaked in transport.&nbsp; The chassis seems to be floating fully and level.</p> <p>&nbsp;</p> <p>Dave</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/296495.aspxMon, 04 Oct 2010 13:57:50 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:296495Medogsfat0https://archivedforum.beoworld.org:443/forums/thread/296495.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=296495<p>1st thing to check is that all 3 transport screws (underneath the deck) are fully released.</p> <p>Chris.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/296483.aspxMon, 04 Oct 2010 12:40:08 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:296483Relaximus0https://archivedforum.beoworld.org:443/forums/thread/296483.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=296483<p>My recently acquired Beogram 3300 has a problem with the arm system.&nbsp; At rest, the arms are not parallel to the deck.&nbsp; They are both higher at the cartridge end.&nbsp; The result is that the cartridge will not track properly as it is not in full contact with the record surface.&nbsp; Any ideas on how to level the arm assembly?</p> <p><img alt="B&amp;O 3300" src="http://www.cateringtoyourdesires.com/dag/3300_01.jpg" width="1024" height="768" /></p> <p>&nbsp;</p> <p>Cheers!</p> <p>Dave</p><div style="clear:both;"></div>