General Forum

Re: HDR2: Big problem

Raeuber — Fri, 17 Sep 2010 04:18:43 GMT

Hi tompa,

thank you for your reply.

In the meantime I have got the solution directly from B&O Denmark. The reason for my problem was NOT the HDR2, but the internal HD module of my BV 10-40:

During my HDR2 was for repair in Munich, my dealer had replaced the HD module because it was gone. After replacing everything worked fine again. So I guessed the problem with my HDR2 (not switching to the right channel) was caused by the HDR2. But it was the HD module: After replacing the module it was necessary to make a "RESET TO FACTORY SETTINGS" in the service menue of the BV10-40!

Now everything works fine when I make timer records and I am happy with the setup.

Regards

Räuber

Re: HDR2: Big problem

tompa — Fri, 17 Sep 2010 00:41:12 GMT

It help, if you tell us what setup you have !

most likely it's a sw problem and maybe in tv-set after update hdr2

by Hd module did you mean built in b&o ? or is it a separate box

HDR2: Big problem

Raeuber — Sat, 11 Sep 2010 05:12:44 GMT

Hello,

few weeks ago my HDR2 often interrupted records for no reason. My dealer had updated the software of the HDR2 but this did not solve the problem. Therefore the HDR2 was sent to Munich, where the harddisk was replaced. After that records didn´t interrupt any more.

But from that time I have a NEW problem:

If I program a timer record with my HD module, the HDR2 switches on the HD module at the programmed time, but does not set the right channel. The HDR2 records always the last channel of the HD module that was on before turned off the whole system. My dealer and the technicians in Munich have no idea, although they have already contacted B&O in Denmark.

I guess now it has something to do with the above mentioned software update of the HDR2! My dealer told me, that it´s not possible to downgrade the software. My HDR2 shows in the service menue (0-0-GO) the following:

H8 Information:

AP SW 3.6

AP Boot 1.1

IOP SW 22.0

Type No. 4643

Item No. 1464007

IOP SW 19856619

IC Information:

MSP 02070F48

HIP 09

HOP 0C

ML Information:

ML 92.00b

MLBOOT 92.00c

STB TABLES 03.80a

STB Timer 0

Has anyone of you an idea if some verions are not actual or if any mentioned versions are not compatible? Or any other idea what to do solving the problem?

Any suggested solutions are welcome because of my despair!

Regards

Räuber