General Forum

Re: news on beovision 10

koning — Sun, 29 Aug 2010 05:39:42 GMT

I've done that.

I thought that the uk version has a 200hz panel.

On the website 100hz???...... strange

Re: news on beovision 10

DoubleU — Sun, 29 Aug 2010 05:29:41 GMT

It's on the website. Just choose another country. (on top of the page)

Re: news on beovision 10

koning — Sun, 29 Aug 2010 04:28:47 GMT

Hmmmmmm.......nobody

Re: news on beovision 10

koning — Sat, 28 Aug 2010 03:50:58 GMT

Can anyone tell me what the US beovision 8-40 specifications are.

Re: news on beovision 10

leogenghis — Fri, 27 Aug 2010 19:31:50 GMT

The "3 HDMI" has been available in US BV 10-40's since the beginning (since they don't have DVB module installed). The most exciting feature of the new version is that it may have an upgraded screen, lit on 2 sides, not 4 sides like the old version. It's supposed to eliminate the clouding issue. I've heard the firmware update partially helped the old model, but my dealer hasn't had a chance to install it yet.

Leo

Re: news on beovision 10

koning — Fri, 27 Aug 2010 14:10:50 GMT

BV8-40mkII 200hz panel and 3 hdmi

Re: news on beovision 10

Roger — Fri, 27 Aug 2010 05:56:10 GMT

This is also relevant for the BeoVision 8-40 mkII.

Regarding the Beo4 type no 1710, this has been on sale for a while - take a look here

Roger

Re: news on beovision 10

oli — Fri, 27 Aug 2010 02:51:30 GMT

Thanks for your advice, but in fact I don't care having 2 or 3 HDMI very franckly, because 2 will be enough for my use, if I use them, and it won't be the case actually. And regarding the Beo4, I missed 2 or 3 generations already, and my MK1 is working perfectly for what I am doing with my MX8000 in a second room, not even linked to the main room. In the main room I am actually using a BL1000 with the BC2, the new Beo4 coming will replace it probably. Depreciation is a fact, but in my experience, when I buy a Beo TV, it is to keep it for a long time (so more or less, it is depreciated since a while, particulary with the amount of new panels coming so quickly since a few years, it becomes like computers... at one time you have to make a choice, knowing that in 2 monthes something better will be out), often until it died. The LX2500 died after more than 20 years (tube), the second MX died recently and will be replaced by the BV10.

In fact the MX is not dead, probably only the alimentation, but it is not interesting to repare it as the spare part costs more than what I paid for it (it was a second hand), so it's time to enter in the new generation of TV ;), but I am sure than in a few monthes a new panel will replace the actual one in the BV10, 3D will arrive soon or later (and I won't miss this feature...)

Re: news on beovision 10

KingOfSnake — Thu, 26 Aug 2010 18:12:02 GMT

If I were you I would check with the Dealer that he is going to supply the latest spec stock and BEO4 or you will be left with the old model and suffer relatively rapid depreciation.

Re: news on beovision 10

oli — Thu, 26 Aug 2010 11:30:17 GMT

Mine (46") will be delivered/installed in 2 days (saturday) at home. I will tell you regarding HDMI plugs and beo4 release.

news on beovision 10

dueno — Thu, 26 Aug 2010 10:17:30 GMT

look at this:

http://www.bang-olufsen.com/UserFiles/File/ug/beovision10/beovision10_guide_english.pdf

there is two user guide on the site one PRE AUG 2010 and this one (the new)

they talk about HDMI matrix, beo4 navigation button and.....

they say there is 3 HDMI port :A, B and C!!!!!!!!