General Forum

Re: Beovision 7 MK4

Seanie_230 — Fri, 30 Jul 2010 02:04:11 GMT

yeah its 100% not there.

there is another thread about this in here so it might be a problem with 9.01 but i cannot adjust my masterlink delay.

edit: If the ML is grayed out and you have DSM module 2.0 or higher AST needs to be in the menu but does not have to be switched on just present.

If AST does not appear then the DSM FEP and DSM DSP software are to old

This is seperate from the H8 Software we normally talk about.

My TV has 9.01 but the DSM module sw is 4.23a and 4.19 which is to old for AST to be shown.

Re: Beovision 7 MK4

Vienna — Thu, 29 Jul 2010 19:49:29 GMT

Seanie_230:

cannot find AST to switch it on.

You'll find the "switch" for AST in the sound-menue of a 7-40 Mk5 /SW 8.12

selecting menue > options > sound > AST ON/OFF

? maybe a Mk4 / SW 9.01 is different ?

Re: Beovision 7 MK4

Seanie_230 — Thu, 29 Jul 2010 18:07:23 GMT

Def have MK4 now.

100/120Hz showing in panel info.

one thing i cannot set is masterlink delay as its still grayed out

i have the dst 2.5 according to the hidden menu and software 9.01

cannot find AST to switch it on.

Help Pls

Re: Beovision 7 MK4

Vienna — Thu, 29 Jul 2010 06:04:04 GMT

Seanie_230:

ok next question

was the MK4 without DVD / B Ray ever 100Hz or was it always 50Hz??

History - as far as I remember just beeing 93% sure *g* :

- The "special model" BV 7-40 TV never got a later version than the Mk3 = 50/60 Hz chassis.

- At approx. the time of introducing BD (summer 2009) the "special model" BV 7-40 TV was discontinued.

- The built in DVD/BD became an optional feature

- there should be 7-40 Mk4s with 100/120Hz w/o DVD/BD
(been produced in the 2nd half of the year 2009 and 1st half of the year 2010)

- 7-40 Mk5 200/240 Hz was introduced mid 2010

Re: Beovision 7 MK4

tobeyone — Thu, 29 Jul 2010 05:56:27 GMT

Good job you didn't change the notes at the bottom of your posts about having a BV7 Mk III then!!!

Re: Beovision 7 MK4

Seanie_230 — Thu, 29 Jul 2010 05:32:50 GMT

Hello All

All sorted!

Bit of a silly mistake by a dealer.

MK4 on its way.

Thanks for all your help!!!

Re: Beovision 7 MK4

Seanie_230 — Thu, 29 Jul 2010 04:31:08 GMT

ok next question

was the MK4 without DVD / B Ray ever 100Hz or was it always 50Hz??

Re: Beovision 7 MK4

Vienna — Thu, 29 Jul 2010 03:46:38 GMT

Seanie_230:

OK the type is 9459 and First four digits of the serial are 2144 which i believe is a MK3 ?

It's a 7-40 TV (w/o DVD/BD built in)

- chassis similar to Mk3 types

- to get AST the DSM module has to be exchanged to new type DSM MK 2.5 für BeoVision 7
ask your dealer/service center

Re: Beovision 7 MK4

Seanie_230 — Thu, 29 Jul 2010 03:21:54 GMT

Hello

OK the type is 9459 and First four digits of the serial are 2144 which i believe is a MK3 ?

Re: Beovision 7 MK4

Vienna — Thu, 29 Jul 2010 03:16:38 GMT

Seanie_230:

Hz Issue

Software i have is 100% 9.01, and its saying 50Hz not 100 as i understand that the software fixed a bug showing 50Hz on 100Hz panels years ago.

AST

In menu options ? sound i have speaker type etc etc but no AST option.

The header of your posting says it's a "MK4 question"
but your questions/answers indicate you have a MK3 (or earlier) version ...

The 4-digit type # or the serial # would tell ...

Re: Beovision 7 MK4

Seanie_230 — Thu, 29 Jul 2010 02:52:11 GMT

Hz Issue

Software i have is 100% 9.01, and its saying 50Hz not 100 as i understand that the software fixed a bug showing 50Hz on 100Hz panels years ago.

AST

In menu options ? sound i have speaker type etc etc but no AST option.

Re: Beovision 7 MK4

fishta — Thu, 29 Jul 2010 02:40:46 GMT

On both of those basis, the fact you don't have the AST function and its telling you its only 100Hz I would say that you are on very old software not 9.01 as you thought or you have been sold a MK3 with Blu-Ray Retrofit.

Hopefully its the old software as that can be fixed!

Re: Beovision 7 MK4

Seanie_230 — Thu, 29 Jul 2010 02:37:15 GMT

i have found panel output and it shows 50Hz also.

I dont seem to have the AST menu under sound???

does anyone have the type numbers for this TV??

Please help!

Re: Beovision 7 MK4

Vienna — Wed, 28 Jul 2010 18:12:15 GMT

Seanie_230:

Is the MK4 supposed to display 100Hz as i read in the software thread???

In your "Customer Service Menue" you'll find "Panel Output" and "100" for a MK4
("200" when it's a MK5)

! This is the frequency of the panel !

Your figures of 50/47,99 are the frequencies for the "raw=incoming" signal before processing.
(the same figures would also be displayed on a MK5)

Re: Beovision 7 MK4

Vienna — Wed, 28 Jul 2010 17:59:42 GMT

Seanie_230:

How do i enable that?

menue > options > sound > AST ON/OFF

AST thread: http://forum.beoworld.org/forums/p/33197/271117.aspx#271117