General Forum

Re: Beolink 1000 Remote Control Loudness

tournedos — Wed, 11 Aug 2010 11:09:59 GMT

Brilliant! Enjoy your new system

Re: Beolink 1000 Remote Control Loudness

dmw — Wed, 11 Aug 2010 08:42:18 GMT

Hi tournedos - just wanted to let you know that I have finally got round to getting a Beolink 1000 remote mark 3 or latter and you were correct with the above advice - so just wanted to let you know and say thanks!

dmw

Re: Beolink 1000 Remote Control Loudness

dmw — Fri, 09 Jul 2010 09:12:41 GMT

Thats great - thank you very much!

All I meant by 'computer link' was how to hear sound from the computer via a PC to TV cable into the MX tv (audio aux link) and out through the Beolab 3 speakers. I am not particularly technical on these matters but hope that clarifys!

dmw

Re: Beolink 1000 Remote Control Loudness

tournedos — Thu, 08 Jul 2010 15:24:18 GMT

The loudness on/off problems you may have read about only refer to usage with Beomaster receivers. I'm not too familiar with the MX3500 menu structure, but I believe loudness is just another setting in there and you will be able to navigate it with any version of Beolink 1000 - all you need is the SOUND button.

By the way, what do you mean with "computer link"?

Re: Beolink 1000 Remote Control Loudness

dmw — Thu, 08 Jul 2010 14:45:45 GMT

Hi Andy,

Many thanks for your warm welcome and reply. A very useful thread to advise on the various Beolink 1000 marks and their differences!

If you or anyone else is able to clarify the loudness query that would be great too,

dmw

Re: Beolink 1000 Remote Control Loudness

Jandyt — Thu, 08 Jul 2010 14:07:54 GMT

Hi DMW, and welcome to BeoWorld.
You may find THIS thread useful.

Andy T.

Beolink 1000 Remote Control Loudness

dmw — Thu, 08 Jul 2010 12:25:44 GMT

Hello, I have just joined Beoworld and would be very grateful if someone could please answer the below query.

I currently use a non B and O remote control (CME IR3573) with a 1989 MX 3500 tv. I have recently plugged a set of Beolab 3 speakers into the back of the tv and also connected my computer to the back of the tv. The CME remote control operates all functions apart from activating the computer link (i know there is no problem with wire or tv as I have been able to activate the computer link with a relatives beo 4 remote control).

I would now like to get a beolink 1000 remote control (to allow me to operate the computer link) but remember reading somewhere that only certain marks allow you to access / alter the loudness function (as I am currently able to do with the CME remote control). I would be grateful if someone could please clarify if this is correct and if so which mark to get and how to tell the difference between the marks.

Many thanks,