General Forum

Re: Beovision 10-32 on its way !?

expoman — Wed, 21 Jul 2010 19:19:55 GMT

Seems like a plastic frame would be the obvious choice from that list.

Re: Beovision 10-32 on its way !?

Roger — Wed, 21 Jul 2010 00:29:38 GMT

The challenge regarding the BeoVision 10-32 is obvious: A scaled down version of the BeoVision 10 will have the same material cost and the same labour cost (same frame, same speakers, same amp, same connections...) etc - the only less expensive item will be the display it self. So, based on simple math the 32" and 40" will cost almost the same.

So what should the Danes do? Go for a true BeoVision 10, no light version, perhaps lower the margin and sell a 32" for the price of a BV8-40 +10%, or should they look at the frame and use the same type of plastic found in the BV8 series?

Roger

Re: Beovision 10-32 on its way !?

jk1002 — Tue, 20 Jul 2010 16:30:48 GMT

>>Same goes for the new "BeoSound 1" with iPod/iPhone dock.<<

I hope that they do not waste too much time on it but come up with a more rock solid example for a home MP3 player.

Still waiting for updates to the BS5 ........

Re: Beovision 10-32 on its way !?

Sal — Tue, 20 Jul 2010 11:19:59 GMT

jk1002:
>>The BV10-32 will take the place of the BeoVision/Center 6 series for link rooms.<<

That is a bit of a pity. The design of the BV6 is very different then from the BV10. Try placing the BV10 on a shelf.

I don't fully understand why it is so tricky to run the TVs on the same platform and retain their frames.

I always loved the Bv6 and am still sad it never made it to the US.

I agree, I loved the differences in styles of the different B&O Television ranges, now the only standout is the BV8, all other TVs are flat quadrilaterals; beautiful flat quadrilaterals nonetheless!

Re: Beovision 10-32 on its way !?

moxxey — Tue, 20 Jul 2010 06:43:47 GMT

Roger:

The price could be close the 8-40... Seems like they will show it to the dealers in September, but a release date is stated yet (but Oct/Nov seem reasonable based on previous experience).

Thanks Roger.

One question - you hinted that the BV10-32 might have a different frame (or different quality build), due to the price. Are you aware of the differences?

Re: Beovision 10-32 on its way !?

Bas — Tue, 20 Jul 2010 04:59:23 GMT

Thank you for your update Roger, Seems to me that I have to inform Santa to bring me a bv10-32 this year.

Re: Beovision 10-32 on its way !?

Roger — Tue, 20 Jul 2010 04:23:58 GMT

The price could be close the 8-40... Seems like they will show it to the dealers in September, but a release date is stated yet (but Oct/Nov seem reasonable based on previous experience). Same goes for the new "BeoSound 1" with iPod/iPhone dock.

Roger

Re: Beovision 10-32 on its way !?

Bas — Tue, 20 Jul 2010 03:36:14 GMT

Any news on price or possible releasedate?

Re: Beovision 10-32 on its way !?

Raeuber — Thu, 15 Jul 2010 05:07:39 GMT

BeoGreg:

Guys,

I can confirm that my B & O tech said the clock as been replaced by a small B & O logo on the right.

I can't confirm it from my experience because we are still working on how to get my DVB-HD module back to life.

Since a PUC update I lost my DVB-HD, it's n/a in the service menu for no reason.

The last information from B & O (total reset - stick USB in for 4 minutes - unplug without standby - restart) didn't work.

Like you, I whant to know !

Cheers,

Gregory

Hello,

now I have the same problem: Two days after updating my BV10-40 with software build 127 my HD module is dead (n/a in service menue). A reset to factory settings does not help, also a special instruction-sheet from B&O support (total reset - stick USB in for 4 minutes - unplug without standby - restart) can´t wake up the HD module. My dealer will now replace the HD module, but I fear build 127 had killed the module!

I am very disappointed!

/Räuber

Re: Beovision 10-32 on its way !?

ToeKneeAus — Mon, 12 Jul 2010 06:50:56 GMT

No one has any more news on a BV10-32 then ?

Re: Beovision 10-32 on its way !?

david707 — Fri, 09 Jul 2010 03:13:39 GMT

Quite a large gap from 32 to 40. 37 somewhere in the LCD range would be a useful addition.

Re: Beovision 10-32 on its way !?

ToeKneeAus — Thu, 08 Jul 2010 19:15:33 GMT

My hope is that if B&O are making a BV10-32 then they have a right size panel (32") to update the BV-7-32 with a modern panel (and hopefully an updated Beosystem 3 "lite").

One can dream !!

Re: Beovision 10-32 on its way !?

Vienna — Thu, 08 Jul 2010 07:13:42 GMT

Hiort:

Can I update my BV10 myself, or does this has to be done by service tool?

When was Build 127 released?

I do not have DVB-HD installed, but I want the possibility to name sources.

- You'll need the service tool (and your dealer/service)

- Beginning of the month

Re: Beovision 10-32 on its way !?

Hiort — Thu, 08 Jul 2010 04:12:03 GMT

Vienna:

BeoGreg:

the latest software update (build 126) wich do a great job for the "clouding issue"

Build 126 for BV8-40 BV10-40/46 (C2 chassis)
has been withdrawn (removed from the service tool)
andhas been replaced by Build 127

Build 127 fixes the DVB-HD blocking problem
(if Radio and then standby was selected)

Some new STB's on the PUC list, naming of sources à la BV7 and
yes, hidden in the "Forbidden City" , ...

Can I update my BV10 myself, or does this has to be done by service tool?

When was Build 127 released?

I do not have DVB-HD installed, but I want the possibility to name sources.

Re: Beovision 10-32 on its way !?

BeoGreg — Thu, 08 Jul 2010 03:28:39 GMT

The picture is darker from standard set up, so the black looks more black and more uniform.

It's not annoying anymore, and I know what I'm talking about, my first BV10 as been changed for severe "clouding issue".

But instead of having a too bright picture now there's a slightly dark picture. But you can play with contrast in the menu and it's perfect.

Cheers,

Gregory