https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/280430.aspxSat, 12 Jun 2010 10:02:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:280430root0https://archivedforum.beoworld.org:443/forums/thread/280430.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=280430<p>OK this is what I did:</p> <p><img src="http://img441.imageshack.us/img441/1070/bild2b.png" alt="" /></p> <p>So since there are only 3 wires in the BS2-IR-cable: yellow, green, and brown, I only connected these three as shown in the Beolink Passive manual.</p> <p>This caused some problems, the Beosystem 2 was changing the channels sometimes accidentaly, very strange.</p> <p>changed the wires now so it matches the picture that matbkk posted, hope it will solve that problems (for the moment it does, but you never know...)</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/280270.aspxFri, 11 Jun 2010 03:30:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:280270matbkk0https://archivedforum.beoworld.org:443/forums/thread/280270.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=280270<p>Hi</p> <p>I just made it few feews ago and took a picture of the wiring, it works so it should help you.</p> <p><a target="_blank" title="IR EYE WIRING !" href="http://www.casimages.com/img.php?i=100611103022238322.jpg">http://www.casimages.com/img.php?i=100611102933479629.jpg</a></p> <p><a target="_blank" title="IR EYE WIRING 2 " href="http://www.casimages.com/img.php?i=100611103022238322.jpg">http://www.casimages.com/img.php?i=100611103022238322.jpg</a></p> <p>Regards,</p> <p>Mat</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/279815.aspxWed, 09 Jun 2010 07:40:16 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:279815stefan0https://archivedforum.beoworld.org:443/forums/thread/279815.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=279815<p>Yellow = 5V</p> <p>Green = IR Data</p> <p>Brown = Sense .....or is it black (?) = ground</p> <p>Hope this helps</p> <p>Stefan</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/279807.aspxWed, 09 Jun 2010 06:50:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:279807root0https://archivedforum.beoworld.org:443/forums/thread/279807.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=279807<p>I just got a Beovision 4 with Beosystem 2 and now need to screw the cable to the IR eye.</p> <p>In the setup manual is a different IR eye with 8 screws, I got one with only 5 screws.</p> <p>The IR cable has only green-brown-yellow, so what to do?</p><div style="clear:both;"></div>