General Forum

Re: Beosound 4 blinking red

dilznik — Tue, 01 Jun 2010 07:56:08 GMT

Thanks for the responses guys. It was doing all kinds of weird wacky things like starting the radio and not going off, it let me put my PIN in but wouldn't turn off, and the BL3500 wasn't responding at all. So I disconnected the BL3500 and voila, the BS4 works fine. Long story short, I traced the problem to the little splitter box thing (the one where you have to stab the individual wired into box) and all is well with the world.

I was kind of surprised about that.

Re: Beosound 4 blinking red

alenvprekrsku — Tue, 01 Jun 2010 04:32:32 GMT

Overvoltage possible? Do you have a surge protection? Try to reset with disconnection all cables and interconnects.

Br A.

Re: Beosound 4 blinking red

joeyboygolf — Tue, 01 Jun 2010 04:24:46 GMT

I suspect that you have messed up the pincode entry and will now need to leave it for at least 3 hours until the system will allow you to re-enter the correct pin code.

This is all described in your user manual!

Take a tip from me........when you do get it working.........de-activate the pin code system ( also described in the user manual ). That way you won't have this problem in the future.

Tip number 2 is to upgrade your subscription to BeoWorld and you will have access to the user manual if you have mis-placed the one that came with the unit when it was first purchased.

I will now get off my soapbox and crawl back in my hole

Beosound 4 blinking red

dilznik — Tue, 01 Jun 2010 03:42:37 GMT

Hi there,

I had a power outage today and since the power came back on, my BS4 is blinking red and won't let me put in the PIN code. The glass goes up when I'm at it but the buttons don't react and the PIN entry menu thing doesn't come up. It just sits there blinking.

Any ideas?