General Forum

Re: How do I set up a BC2 with a Panasonic projector?

paddy2042 — Wed, 04 Jul 2007 17:16:46 GMT

I was hoping that I could use somee other way than SCART, mostly because the cable is so thick and bulky, but maybe you are correct and that is the only way.

Re: How do I set up a BC2 with a Panasonic projector?

Thomas — Wed, 04 Jul 2007 02:40:39 GMT

Hi,

Assuming you have a B&O TV as Video Master and for Surround sound

My guess is that you have to use a SCART splitter, then run one SCART lead to TV and the other SCART you can either run direct to the projector (If projector have SCART input), or convert to RGB with for instance CYPRESS converter CSY-2100.

On Beo4 you then use the AV+DVD command that would start the DVD with surround sound but without TV picture, and hopefully you would now have a signal to the projector.

Thomas

Re: How do I set up a BC2 with a Panasonic projector?

paddy2042 — Wed, 04 Jul 2007 02:11:15 GMT

Is there no-one who has set up a projector with a Beocenter 2?

How do I set up a BC2 with a Panasonic projector?

paddy2042 — Sun, 01 Jul 2007 23:20:09 GMT

At present I have an Avant that is master connected to BC2 and BL 8000's. I want to buy a projector and connect it to BC2 socket box. How do I do this? Does the BC2 then become the master with the BL8000's connected directly to socket box. I am hoping that I can operate the projector using a Lintronic box that I now use to control my STB. Can I leave the Avant connected to the setup or do I have to move it to a link room?

Does all of this sound feasable?

I would value any advice.