General Forum

Re: how do i connect beocenter 9300 on beosystem 3?

MoglesMac — Sun, 09 May 2010 11:10:42 GMT

Oh, ok hmm think i really want my Beolab Penta 3 connected to BS7000 since they will be 98% of the time only be used for music, and maybe now and then used as "movie-speakers".

Again thanks for the information :D

Jesper

Sweden

Re: how do i connect beocenter 9300 on beosystem 3?

PhilLondon — Sun, 09 May 2010 06:19:33 GMT

You do not loose 2 way from MCL Link rooms.

You only loose 2 way in the main room if you connect all speakers to the TV and set the TV to option 2. But this is still the recommended setup.

Re: how do i connect beocenter 9300 on beosystem 3?

MoglesMac — Sun, 09 May 2010 06:14:37 GMT

@PhilLondon

Will I also loose 2 way control via MCL? (I have a BeoSystem 7000 wich i plan to link via Beolink 1611 to a BV8, the Beosystem have also a MCL to a bedroom). Dont mind to loose 2 way in mainroom but wonder if 2 way will still work in bedroom (linkroom via MCL)?

Thanx in advance

Jesper

Sweden

Re: how do i connect beocenter 9300 on beosystem 3?

Seanie_230 — Sat, 08 May 2010 13:30:54 GMT

Hello

So i need to get the beolink convertor 1611 for use with the 9300.
I have never had a two way system so i am not going to miss anything.

Re: how do i connect beocenter 9300 on beosystem 3?

stefan — Sat, 08 May 2010 12:24:43 GMT

Sorry, BC9300 is no two way system.

Stefan

Re: how do i connect beocenter 9300 on beosystem 3?

PhilLondon — Sat, 08 May 2010 12:07:36 GMT

Note that you lose 2 way control, if you have a Beolink 5000 or 7000.

Re: how do i connect beocenter 9300 on beosystem 3?

stefan — Sat, 08 May 2010 12:03:32 GMT

If I remember correctly 1614 is a earlier version - you will need 1611. There is also a 1610 for AV9000 and a 1615, called Beolink Video.

Stefan

Re: how do i connect beocenter 9300 on beosystem 3?

Seanie_230 — Sat, 08 May 2010 11:41:32 GMT

Hello

Funny enough i come one here to ask the same exact question but connecting a Beocenter 9300 to a BV7.

so what is the difference with the beolink convertor 1611 and 1614.

Re: how do i connect beocenter 9300 on beosystem 3?

PhilLondon — Sat, 08 May 2010 10:19:49 GMT

andreabang:
When i will press "CD" on beo4 will it automatically recognize the beocenter?

Yes!

Re: how do i connect beocenter 9300 on beosystem 3?

Russ — Sat, 08 May 2010 08:37:48 GMT

Hi Andrea,

you will need a 'new' BeoLink Converter, a MasterLink cable, a fully wired PowerLink cable, and an Aux/Datalink cable to hook those 2 together. You will want to set the 9300 to Audio Option 0 and the BS-3 to Video Option 2. Everything should be fine from there.

Good luck!

how do i connect beocenter 9300 on beosystem 3?

andreabang — Sat, 08 May 2010 08:00:34 GMT

once connected,When i will press "CD" on beo4 will it automatically recognize the beocenter?

thx

andrea