General Forum

Re: Beovision avant built-in video player

Emme — Wed, 29 Aug 2007 14:17:20 GMT

sorry for taking so long to reply but computer crashed and only just got it back. Have connected a scart as suggested and hey presto the video is working again. thanks for all your replies.

Re: Beovision avant built-in video player

The Stig - ver. 1.7 — Sat, 30 Jun 2007 09:49:32 GMT

No just a full mounted cable = 1,2 cm in diameter

Re: Beovision avant built-in video player

Iconic-AV — Sat, 30 Jun 2007 08:54:20 GMT

welcome to beoworld,

there should be a short scart lead from the "V-TAPE" scart socket to the first of 2 scart sockets located just above the round floor stand at the rear, not sure if it needs to be a special scart lead or if any replament will do, im sure one of the guys on here will know for sure

jay

Re: Beovision avant built-in video player

The Stig - ver. 1.7 — Sat, 30 Jun 2007 08:53:33 GMT

Yes yuo need a scart cable from AV on VCR to V-TAPE on TV.

Re: Beovision avant built-in video player

Peter — Sat, 30 Jun 2007 08:51:30 GMT

Just spoken to an expert I know (!) and there should be a short lead coming out of the Avant that plugs into this socket. It is normally held in by a couple of clips.

Beovision avant built-in video player

Emme — Sat, 30 Jun 2007 08:34:35 GMT

Recently moved house and the video player no longer works just a white screen. When looking through the user and set up guide the diagram showing therear socket panel shows a decoder, AV and blank area for the V. Tape when I look at the rear of my tv under the space marked V Tape there is actually a socket for the connection of the built in video recorder but nothing is pluggede in or linked.. I wonder is something meant to plugged in this socket - did it fall out/off during the move? Any tips greeatly appreciated.