General Forum

Re: Beovision 5 Standby light colour

vikinger — Fri, 23 Apr 2010 07:00:04 GMT

After a 30 second disconnection the red light is on, and seems to come on OK after running the TV with its STBs and then switching off again.

The green light had stayed on for three days (whiilst I was away) although the elctronic curtains had shut, and both STBs had gone to standby. I am guessing that the problem was something to do with the HDR1 but we hadn't set it to record anything so it's all still a bit of a mystery (and we haven't got a link between TV systems or anything else.)

Graham

Re: Beovision 5 Standby light colour

vikinger — Mon, 19 Apr 2010 13:41:18 GMT

Thanks for the responses. I am at a different location today but will check out the TV again tomorrow. Thinking about it, I've probably only had this situation since adding the HDR1. The screen on the TV definitely shuts down and the electronic curtains close, but the light stays green. I was also fairly certain that the STBs were going into standby but I'll need to double check. I'll report the outcome one way or the other!

Graham

Re: Beovision 5 Standby light colour

Beobuddy — Mon, 19 Apr 2010 12:54:00 GMT

When the green light is on, the BV5 isn't off.

Same situation when in a link room is watched to any videosource. The BV5 switches on, the screen stays dark.

If you have speakers connected to a BV5, the display tells why/which source/status the BV5 is in.

Re: Beovision 5 Standby light colour

mr_anders_son — Mon, 19 Apr 2010 12:25:35 GMT

If your STB is not off when BV5 is off then BV5 lights green

Re: Beovision 5 Standby light colour

Beobuddy — Mon, 19 Apr 2010 11:59:04 GMT

Still no response?

Try to disconnect from the mains for about 30s.

Then re-connect it again and after a few seconds the red light should light up.

Then turn on/off the tv. Does the green light stays on? Try to disconnect the ML, perhaps something in the link keeps the tv on.

Beovision 5 Standby light colour

vikinger — Sun, 18 Apr 2010 17:03:21 GMT

Have a BV5 recently purchased from Lee and set-up with HDR1 and two STBs. All working fine, but just noticed that when the TV is switched off the green light in the top IR receiver dome stays green. I can't remember whether it ever turned red (which seems to be the norm with my other B&O TVs.)

Is this normal for a BV5. If not, anything to worry about????

Graham